Curt Universal Fifth Wheel Base Rails - Gloss Finish

See what our Experts say about this CURT Accessories and Parts

• Will Curt 5th Wheel Installation Kit Fit 2005 Chevy Silverado 2500 With Short Bed
  Yes, the Curt Custom Fifth Wheel Bracket Kit for Chevy/GMC # C16418 will absolutely fit your 2005 Chevy Silverado 2500 with a short bed. This bracket kit is also the best option for your truck because it does not require any drilling into your frame rails to install. This install kit does require the use of Curt Fifth Wheel Base Rails # C16204 (Carbide Black Finish) or # C16104 (Gloss Finish), both of which will mount a Curt 20K sliding fifth wheel hitch. These parts also come as a kit,...
  view full answer...
• Will the Curt Custom No-Drill Fifth Wheel Bracket # C16420 Fit My 2014 Ram 1500?
  Yes, the Curt Custom, No-Drill Fifth Wheel Installation Kit # C16420 will fit your 2014 Ram 1500 quad cab (6-ft bed) and bolt right onto the frame. However, whenever you install the compatible rails # C16104, it will require some drilling through the bed.
  view full answer...
• Recommended Curt 5th Wheel Rails and Replacement Hardware
  Yes, you can. You will need the Curt Universal 5th Wheel Base Rails item # C16104 and the Replacement Hardware for Curt Universal 5th Wheel Installation Kit item # C16111. These will match up perfectly with the Curt Custom 5th Wheel Bracket Kit item # C86WR you already purchased. Please note that the hardware kit will supply hardware for both the rails to be installed and the brackets. There is no option for a hardware kit that only installs the rails. There are quite a few different size...
  view full answer...
• No-Drill 5th Wheel Brackets That Fit 2021 Chevy Silverado 2500
  We do have no-drill 5th wheel brackets which are a fit for your 2021 Chevy Silverado 2500. The correct fit for your truck is the following: - Curt Custom 5th Wheel Bracket Kit for Chevy/GMC Truck # C16429 This bracket kit will install onto your Chevy without any drilling, though they do require you use the Curt above-bed base rails (all 5th wheel brackets need to use the same manufacturer's base rails in order to fit). For that you can choose from two different finishes, either the Curt...
  view full answer...
• Fifth Wheel Mounting Brackets for 2016 Toyota Tundra
  Mounting brackets for your 2016 Toyota Tundra are available by themselves, though the correct fit will depend on the rails you have, as well as your bed size. If your Tundra has a 6-1/2 foot bed and you have Curt base rails # C16104 or # C16204 you need Curt Custom Fifth Wheel Bracket Kit for Toyota Tundra # C16468. Alternatively, if you have Reese base rails # RP58058, Reese Quick-Install Custom Bracket Kit # RP50084 will fit any of the bed sizes for your '16 Tundra. If you let me know...
  view full answer...
• Measurement of Curt Fifth Wheel Base Rails
  I went to the warehouse to take some measurements of the Curt # C16104 base rails and found that they are 43" long and roughly 5-5/8" wide. I have added a photo showing some of the dimensions of the mounting holes for you as well. Center to center, the closest holes are roughly 10" apart, the second set of mounting holes is 20-1/2" while the third set is 29" apart. I have also added a link to a video review of these rails for you to take a look at.
  view full answer...
  
• 5th Wheel Trailer Hitch Installation Kit for 2014 Ram 2500 and SuperGlide ISR Hitch
  For your 2014 Ram 2500 you can use Curt installation kit # C16427-204. This is a custom installation kit which means you will not have to drill in to the truck frame to install the underbed brackets. This means that the kit will install faster and easier than semi-custom or universal kits. Since you are going to get the SuperGlide hitch that fits industry standard rails (ISR) (I believe it is the 2700 model) then it will fit these rails!
  view full answer...
• Compatibility of Curt Custom Fifth Wheel Bracket Kit # C16420 With B and W Hitch
  The Curt Custom Fifth Wheel Bracket Kit, part # C16420, is designed to be used with Curt base rails # C16104 or # C16204. It will fit 2006 to 2008 Dodge Ram Mega Cab and 2003 to 2012 Dodge Ram 2500/3500 with overload springs, including Mega Cab. I would recommend to use installation brackets and base rails from the same manufacturer. I do not recommend mixing manufacturers for rails and brackets as there could be any number of compatibility problems. The Curt base rails are compatible...
  view full answer...
• Does Curt 5th Wheel Hitch R16 Roller Base Fit Universal Base Rails on 2000 Ford Super Duty
  Yes, the R16 base for a Curt sliding 5th wheel hitch will fit universal base rails. The two hitches with these are the Curt E16 5th Wheel Trailer Hitch with R16 Roller # 16516 and Curt A16 5th Wheel Trailer Hitch with R16 Slider # C16521. Both of these will fit Curt Universal Fifth Wheel Base Rails - Gloss Finish # C16104 or Carbide Finish # C16204. For your 2000 Ford F-250 or F-350 Super Duty, to install these rails you will need the Curt Custom Fifth Wheel Bracket Kit for Ford F-250...
  view full answer...
• Curt Fifth Wheel Custom Installation Brackets Work with Curt Base Rails and Many 5th Wheel Hitches
  The Curt Fifth Wheel Installation Bracket Kit - 2009 Dodge Ram 1500, item # C16422, is just the under bed installation brackets. You will also need the Curt Universal Fifth Wheel Base Rails - Gloss Finish, item # C16104 or Matte Finish, item # C16204, to complete the fifth wheel installation on your 2009 Dodge Ram Truck. With the above mentioned items you will be able to use Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky Hitches. I would recommend the Curt E5 Fifth Wheel Trailer...
  view full answer...
• Will Fifth Wheel Brackets Part C16418 Fit a 2009 GMC Sierra Denali Pickup
  Part # C16418 is for 1999-2007 1500 pickups with the older body style, and for 2001-2009 2500/3500 models. The correct part # for your 2009 GMC Sierra Denali is part # C16400. I have included a link to the instructions for the correct part. You will also need RRails, either part # C16104 or # C16204, depending on which finish you prefer. These rails will accommodate Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky fifth wheel hitches.
  view full answer...
• Does Curt Fifth Wheel Bracket Kit C16427 Fit Rails of Universal Kit C16100
  Yes, the bracket kit part # C16427 that you referenced will work with the same rails that come with the Curt universal rail kit part # C16100 that you mentioned as well. Another option would be to just order the rails by themselves with part # C16104.
  view full answer...
• Compatible Fifth Wheel Mounting Brackets For A 2023 Ford F-150 With A 5.5' Bed
  According to Curt's fitment catalog the Curt Custom Fifth Wheel Bracket Kit for Ford 150 # C86WR is a confirmed fit for every model of the 2023 Ford F-150 except for police responder and Lightning models. To go along with the brackets you'll also need some base rails like # C16204 (carbide finish) or # C16104 (gloss finish). According to the instructions the first base rail edge should be installed 28-9/16" from the edge of the bed floor on the tailgate side. Since you have a 5.5' bed...
  view full answer...
  
• Are Hitch Pins Needed with Curt Fifth Wheel Rails
  The hitch you have should have came with pins to secure it to the rails part # C16104. For example the Curt Q20 part # C16130 comes with the pins in the picture I attached. If you are missing pins what hitch do you have?
  view full answer...
  
• Curt 5th Wheel Bracket Kit Fit on 2018 Ram 2500 Short Bed
  The C16426 bracket kit you referenced is not the correct kit for a 2018 Ram 2500 with a short bed; instead, what you need is the Curt Custom 5th Wheel Bracket Kit for Ram Truck # C16427. You did not specify the exact rails you had so please note that this bracket kit requires Curt Rails # C16104 or # C16204.
  view full answer...
• Will Curt Custom Fifth Wheel Brackets C16411 Fit 2018 Chevy Silverado 3500 Using Holes in Frame?
  Yes, the Curt Custom Fifth Wheel Bracket Kit for Chevy/GMC # C16411 will install in your 2018 Chevy Silverado 3500 utilizing the holes that are already in place on your truck's frame. Please keep in mind this bracket kit will require base rails # C16104 (Gloss Black Finish) or # C16204 (Carbide Black Finish). The bracket kit includes all the hardware you'll need to install them and I have also attached a link to the instructions and a video of the kit being installed on a similar year...
  view full answer...
• Curt No-Drill 5th Wheel Installation Kit for 2005 Dodge Ram 2500 Quad Cab
  Yes, you do have the correct Curt 5th wheel install kit for your 2005 Dodge Ram 2500, which is the Curt Custom, No-Drill Fifth Wheel Bracket Kit for Dodge Ram # C16420. This will work for your truck, and you only need to add base rails if you don't have them, the Curt Universal Fifth Wheel Base Rails - Gloss Black Finish # C16104 or Carbide Black Finish # C16204. If you need a 5th wheel wiring harness for your '05 Ram 2500 as well, the correct part is the Curt 5th Wheel/Gooseneck Custom...
  view full answer...
• Could Curt Above Bed Rails Work with Pullrite Hitch
  It depends on which version of the Superglide fifth wheel hitch you have. If it's an ISR version that means it works with industry standard rails like the part # C16104 that you referenced. If its the version that only attaches to the Pullrite rails we wouldn't be able to help.
  view full answer...
• Brackets Needed to Install Curt 5th Wheel Base Rails on a 2017 Ford F-150
  It sounds like you have the Curt Universal Fifth Wheel Base Rails # C16104 that you're wanting to install on your 2017 Ford F-150. With this being the case I recommend getting the Curt Custom Fifth Wheel Bracket Kit # C86WR which comes with custom brackets (which means no drilling into your truck frame) and replacement hardware to get everything installed correctly. These rails and brackets give you the complete kit # C93WR which fits all bed sizes for your 2017 F-150. Please let me know...
  view full answer...
• Curt 5th Wheel Rail Custom Bracket Installation on a 2005 Ford F-350
  You are correct. There are 4 bolts that only get attached to the bed itself when using the Curt Custom Fifth Wheel Bracket Kit # C16448 and rails # C16104 (gloss black) or # C16204 (carbide/matte black). I've attached a video of this installation to assist. You may also want to consider adding a second 7-way like the Mighty Cord 5th Wheel/Gooseneck Wiring Harness w/ 7-Pole Connector - 7' Long # A10-7007 which will give you a clean look and easy connection access when towing.
  view full answer...
• Rails That Work With Curt Custom Fifth Wheel Bracket Kit on 1998 Ford F-150
  According to Curt, the Custom, No-Drill Fifth Wheel Bracket Kit for Ford F-150 # C16437 is going to require you to use Curt base rails, either part # C16104 or # C16204 as these are the rails the mounting brackets were designed to be used with. I have added a link to a video review of the bracket kit for you to take a look at as well as links to video reviews of the rails.
  view full answer...
• What Brackets and Rails Are Needed to Install an RBW Lil Rocker Fifth Wheel in a 2007 Ram 3500
  Custom fit brackets do work better in a sense. The installation time is reduced dramatically because custom fit brackets uses as many factory holes as possible so most of the time you do not have to drill any new holes in the truck frame. Part # C16419 will not fit your Ram 3500, those brackets are meant for Ram 1500. For your 2007 Ram 3500 w/ Overload, you would use Curt part # C16420. We also recommend matching the brackets to the rails. It ensures that the holes in the rails will line...
  view full answer...
• Recommendation For a Fifth Wheel Slider Hitch and Base Rails on 2005 Ford F-250
  Since you are asking about a slider hitch it probably means your 2005 Ford F-250 has the 6-1/2 foot bed. My recommendation for a 16K slider hitch would be the Reese 16K Round Tube Slider Hitch, part # RP30075. I really like the round tube slider, as sometimes the square tube model sliders can bind, making the hitch difficult to slide back and forth. The round tube slider hitch will also give you 12 inches of travel towards the tailgate, compared to the 10 inches with a square tube slider...
  view full answer...
• Replacement Base Rail Brackets For A Curt E-16 Hitch In A 2013 GMC Sierra
  Since you're looking at base rail kits I'm assuming you're looking the brackets that mount the rails to the frame of your Sierra. If your have Curt rails ( # C16104 or # C16204) then you'll need part # C16400 for a 1500 or part # C16411 for a 2500/3500. If you have different rails I would need to know the exact model in order to find the appropriate brackets. If you're looking for something else then just take a picture of it and send me it and I'd be happy to look for a replacement.
  view full answer...

Do you have a question about this Accessories and Part?