Dexter EZ Flex Equalizer that Fits in Place of Dexter 13-10 Equalizer

Question

Question:

Im wanting to upgrade my travel trailler suspension but it is in storage at the moment. Thinking of getting the Dexter K71-652-00 tandem kit. Would you know if it is capable of replacing my current Dexter 13-10 equalizers ? Thks,

asked by: Larry R

1

Helpful Expert Reply:

From previous customers who have had the Dexter 13-10 equalizers we know that the Dexter EZ Flex part # K71-652-00 is the correct cushioned replacement. It will fit and will make a noticeable improvement for your trailers ride quality.

expert reply by: Jameson C

1

Answer 1

I'll start by saying that since the EZ Flex Heavy Duty Rubber Suspension System #K71-652-00 is not wider than the leaf springs, it's not going to reduce the clearance from your wheels in any way. When it comes to your 13-10 equalizer, it is…

view full answer...

Answer 2

As long as you use a qualified fabricator with trailer suspension experience you could have him weld in a spacer between your hangers so that they sit lower. Or you could install taller hangers to make up the difference. This would be the route I…

view full answer...

Answer 3

The 13-10 equalizer is equivalent to the Triangular Equalizer for 1-3/4" Double-Eye Springs - 6-1/16" Long - 9/16" Center Hole #TREQ310. If you go with the Dexter E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle -…

view full answer...

Answer 4

I would be happy to compare the Road Armor, Dexter E-Z Flex, and MORryde equalizers you were looking at for your Jayco Eagle 325BHS. First things first each of these kits are designed to replace equalizers that measures roughly 6" between the…

view full answer...

Answer 5

The correct replacement for a Dexter 13-10 Equalizer is the Triangular Equalizer part #TREQ310, not the Curved Equalizer part #TREQE1. If you want to upgrade, the Equa-Flex Cushioned Equalizers part #LC279688 would work but you might want to go with…

view full answer...

Answer 6

I do have an upgrade option for your 6-1/16" long, 4" tall Equalizer #TREQ310, and since you don't want to lower the ride height with the E-Z Flex #K71-652-00, I recommend going with an option from MORryde, as the Equa-Flex are just too…

view full answer...

Answer 7

The Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System #K71-654-00 you referenced are simply replacements for the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8" Equalizers #K71-652-00. To…

view full answer...

Answer 8

Replacement equalizers #K71-654-00 are only part of what you would need. These equalizers require special shackle straps that are available in the kit which is what you would need. The kit is #K71-652-00. It comes with all the parts needed to upgrade…

view full answer...

Answer 9

You would need to measure from the center of the two bolt holes on your existing shackle straps in order to find the exact replacement. The Dexter Equalizer part 13-10 works with multiple different length shankle straps which will be based on the…

view full answer...

Answer 10

There is a way to allow you to replace the factory cast equalizer on your 2003 Jayco Designer 31RLS 5th wheel trailer with the Dexter E-Z Flex Equalizers. Since your current equalizers are just over 6-1/4" long you will need to use longer…

view full answer...

Answer 11

What you are describing sounds like normal play occurring in your suspension system. When taking turns, it is normal for the suspension to want to bind and cause some play in the suspension system. The design of the Dexter E-Z Flex #K71-652-00 allows…

view full answer...

Answer 12

In regards to trailer suspension, it's always best to swap parts with identical replacements when doing any work so you don't run into issues like you're having now with components binding or making contact. That said, I do understand…

view full answer...

Dexter EZ Flex Equalizer that Fits in Place of Dexter 13-10 Equalizer

Product Page this Question was Asked From

Continue Researching