Recommended Cushioned Equalizers to Replace Dexter 13-10 Equalizers

Question

Question:

Hello, I was looking at cushioned equalizers and wanted to know if there are some the that are direct replacements for my equalizer. It a dexter and has 13-10 is info I can find on it. Thanks for any information you can give me on this. Mark

asked by: Mark K

0

Expert Reply:

The 13-10 equalizer is equivalent to the Triangular Equalizer for 1-3/4" Double-Eye Springs - 6-1/16" Long - 9/16" Center Hole # TREQ310. If you go with the Dexter E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8" Equalizers # K71-652-00 they will work very well but will lower your trailer by about 1 inch. The Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 3K to 6K # LC279687 will also work and will do the same.

expert reply by: Jason S

0

Answer 1

The correct replacement for a Dexter 13-10 Equalizer is the Triangular Equalizer part #TREQ310, not the Curved Equalizer part #TREQE1. If you want to upgrade, the Equa-Flex Cushioned Equalizers part #LC279688 would work but you might want to go with…

view full answer...

Answer 2

I have a great equalizer solution that is cushioned that will fit as a replacement for your 6 inch long equalizers but not from Lippert. Instead you'll want the EZ Flex Equalizer part #K71-652-00 which has a width range of 5-1/4 inch to 6-1/4…

view full answer...

Answer 3

To find the proper replacement equalizer for your horse trailer you will need to take a couple of measurements. Measure from the center of the front hole to the center of the rear hole. Then measure from the center of the top hole down to the center…

view full answer...

Answer 4

I have an attached photo which illustrates the dimensions of the E-Z Flex Heavy Duty Rubber Suspension System, part #K71-653-00 you inquired about. As you can see on the photo, the distance from the outer mounting hole on the arm of the equalizer to…

view full answer...

Answer 5

I would be happy to compare the Road Armor, Dexter E-Z Flex, and MORryde equalizers you were looking at for your Jayco Eagle 325BHS. First things first each of these kits are designed to replace equalizers that measures roughly 6" between the…

view full answer...

Answer 6

I'll start by saying that since the EZ Flex Heavy Duty Rubber Suspension System #K71-652-00 is not wider than the leaf springs, it's not going to reduce the clearance from your wheels in any way. When it comes to your 13-10 equalizer, it is…

view full answer...

Answer 7

You shouldn't loose any wheel clearance with the Dexter E-Z Flex Suspension Kit. First you will want to see which of the Equalizers you need. There is a 6,000lb Equalizers #K71-654-00 (5-5/8") and 8,000lb Equalizers #K71-655-00…

view full answer...

Answer 8

Thanks for the measurements. I recommend using the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long #SP-053275. Then use the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs…

view full answer...

Answer 9

To improve your trailers rough ride and absorb road shock I would start by replacing your trailers equalizers with a shock absorbing equalizer system. The Equa-Flex Cushioned Equalizers part #LC279687 is designed for tandem axle trailers with…

view full answer...

Answer 10

The Dexter EZ Flex part #K71-652-00 can be used to replace your #TREQ310 but you would lose a little bit of height on your trailer since this is a shorter equalizer. Or for something more similar in height we have the MORryde Rubber Equalizers for…

view full answer...

Answer 11

The Road Armor Shock Absorbing Equalizer Kit part #LC696740 will be an exact replacement for the EQ-310 Equalizer. The only difference is the height which will be slightly less for the Road Armor but this will have practically no affect on the…

view full answer...

Answer 12

Your 2014 Jayco White Hawk 20 MRB travel trailer would have came from the factory with the wide stance suspension. That would require you to use the longer Equa-Flex Cushioned Equalizers #LC314336 that are 14-5/8" from eyelets on the equalizer.…

view full answer...