U-Bolts Needed To Attach The CE Smith Galvanized Steel Step # CE26212G Onto A Trailer Fender

Question

Question:

What fasteners are recommended to attach the fender to the CE26212G brackets?

asked by: Bob

0

Expert Reply:

When it comes to installing The CE Smith Single Axle Trailer Fenders # CE19502-2 you will need both The CE Smith Galvanized Steel Step # CE26212G and The CE Smith U-Bolt - Galvanized # CE15284GA.

The bracket has a galvanized steel that helps resist rust and corrosion, and is suitable for saltwater exposure. The items listed above will make your trailer look like new.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

The mounting brackets you can use for the Fulton Single Axle Trailer Fender with Top and Side Steps - Silver Plastic - 13" Wheels #F008593 are the Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)…

view full answer...

Answer 2

I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches. If these aren't an exact match, new holes can usually be drilled into the brackets to make them…

view full answer...

Answer 3

I'd recommend using Redline bolt-on fender brackets, part #PF1135-BKT-2. The brackets will mount as shown in the provided photo using U-bolts that are sold separately. The U-bolts needed will depend on the height and width of your trailer frame.…

view full answer...

Answer 4

Yes, the Fulton Plastic Fenders, item #F008593, will require a mounting bracket. Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use L brackets to mount the fender to your trailers…

view full answer...

Answer 5

I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey #CE19502-2 and the larger 13" Black #CE19503-2. Both options represent the only color available from CE Smith in the respective sizes.…

view full answer...

Answer 6

We definitely have a few options available to replace you current fenders, but if you are looking for the most solid one, the Redline Single Axle Fender #PF11X35W-2 will be the best. This will attach to the frame with included brackets, but something…

view full answer...

Answer 7

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 8

The brackets you will need for your CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2 #CE19502-2 will be the CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty…

view full answer...

Answer 9

If you don't use shackles you don't give the leaf spring enough movement to flex since they stretch out as they compress. So without them your suspension wouldn't move much. I'd recommend you use a hanger kit like the part #APS4 which…

view full answer...

Answer 10

We have a very close option with the #CE19503-2 which is off by only 1/4 of an inch to the measurements you listed. It measures 29-3/4 inch for the inside portion and 33-3/4 inch for the outside portion.

view full answer...

Answer 11

We do have a selection of fenders for 13" wheels that you can use to replace your current fenders. Among our linked selection we have different constructions like aluminum, plastic, and steel. These fenders can mount via brackets or welding…

view full answer...

Answer 12

The bolt pattern on the wheel will be the same, the only difference is the size of the tires. The 4.80 x 8 tire size like the Kenda K371 Bias Trailer Tire, part #AM10004, is 16.1 inches tall and the overall width is 4.6 inches. The 165/65 x 8 tire…

view full answer...