CE Smith Trailer Fenders CE26098G-2 Review Video

L-brackets like the part #CE26098G-2 are a great option for installing the CE Smith Fenders part #CE19503-2. If the fenders will mount right up to the side of the trailer frame I would go with the #PF1135-BKT-2 though as this would be easiest way…

Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part #HP29VR you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part #CE26098G-2. If you do not…

We do have a couple options for trailer fenders that are close to 29-1/2" long, 13" tall and 9-1/2" wide, and I'll go ahead and list them out, as well as their dimensions: - 31.3" long x 9.7" wide…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches. If these aren't an exact match, new holes can usually be drilled into the brackets to make…

We do have a large selection of trailer fenders available that will work nicely with your 15 inch wheels. I recommend taking a look at the CE Smith Single Axle Trailer Fender #CE18041ATB. This is a really nice, aluminum fender that features a…

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

What determines the size fender you need is your trailer's wheel size. The fender in your photo looks like the model from Redline. The smallest version of this we carry is #PF775X21W and is for wheels that are between 8" and…

Thanks so much for the photo, and there is an option for fenders you can install on your trailer with its 14 inch wheels: - Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels #HP36VR You can either have these…

The U-Bolt Kit part #APUBR-10 which is what I recommend using on the Trailer Axle with Idler Hubs part #e82GR will require a torque value of 30-50 ft. lbs.

The diameter is 1-3/4 inches of the Trailer Axle with Idler Hubs #e82GR. The #e82GR is a 2,000 lb axle with an idler hub on it that has a 5 on 4-1/2" bolt pattern. It measures 60" from hub face to hub face and 48" from…

Thank you for the photos! According to my information and what you sent in, your best option for a replacement fender is the CE Smith Black Fender: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - #CE19503 (Qty 1) CE Smith Single Axle…