Fulton Trailer Fenders - No Step - F008550 Review Video

The Fulton Plastic Fender - Black - 8 to 12 inch Tires, item #F008550, is designed to be mounted to existing hardware or mounted with brackets designed to attach to the specific trailer frame they are being installed on. No mounting hardware is…

We do offer two very similar black plastic fenders from Fulton, both also with a top step, part #F008559 and #F008551 that can be seen on the link provided. The white Fulton Single Axle Trailer Fender with Top Step #F008542 measures 7-1/2 wide x…

I wasn't able to find anything related to the part number you listed but based on what you described it sounds like you are looking for the Fulton fender part #F008582 which is a black, plastic fender with a step on the front, back, and top.

We have a U-bolt type carrier that fits 4 bolt spares like yours. For that we have the part #CE22007Z-11050-2. Or if you are looking for a carrier that holds the wheel away from the trailer you'd want the part #FSTC1000301.

We do not offer trailer-mount spare tire carriers with a narrower u-bolt than the CE Smith Spare Tire Carrier for Trailers, part #CE22007Z-11050-2, which has a u-bolt that is 3-1/16-inch wide. However, this part will still work on your 1-1/2-inch…

I have a great solution for you. Unfortunately, the Mounting Brackets for Trailer Fender - 8" to 12" Wheels #CE26065PGA will not fit for mounting your Fulton Single Axle Trailer Fender with Top and Side Steps 008582. However, the parts that…

You can mount the fenders directly to the trailer frame through the fender skirt on the back of the fender. I would recommend using large washers if you drill through the fender skirt and attach the fender directly to the trailer frame. If mounting…

You should be able to mount the Fulton Trailer Fender, #F008550, to the side of your camper trailer. Depending on the trailers construction you may need to use a mounting bracket and some carriage bolts to utilize the square attachment holes in the…

The recommended mounting brackets you need for use with the Fulton Single Axle Trailer Fender #F008550 that you referenced is the #CE26065PGA.

For the width you have between your trailer frame and the outer edge of your tire the fender part #CE19500-2 you mentioned would work great. Then for fender brackets the part #CE26065PGA would be all you'd need and you'd be set.

You can use the Galvanized Steel, L-Shaped, Bolt-On Brackets, #PF775-BKT-2, if you determine that they will fit the fenders and your trailer. The fenders we carry do not come with brackets because every trailer is different. I have included a picture…

I did a little research and found that the model 8000 Snowbear trailer had a fender that is a little different than the Fulton Plastic Fender, #F008550. The Fulton fender has a fender skirt while the Snowbear OEM one does not. If you are looking to…