Customers compare CE19504-2 to these similar products
Products Featured in this Video
Today we're going to be taking a look at the C. E. Smith single axle trailer fender with top and side steps. Fenders are designed to cover the tires on your trailer. They act as a splash guard to keep road debris from hitting other vehicles, and to help protect your trailer's cargo. This is going to contain three steps, total.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Black Plastic - 14" Wheels - Qty 1 #CE19504 is my recommendation for you. It is 43-1/8 inches long x 11 inches wide x 12-1/2 inches tall which will give you a skirt height of 11-1/2…
view full answer...The dimensions you have are nearly identical to the CE Smith #CE19504-2 you looked at. However, these are designed for 14" wheels. For 15" wheels you would need the Fulton #F008585-2. These are slightly longer and taller at 10-1/4"…
view full answer...The CE Smith Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 14" Wheels, has a mounting point that measures, from center to center, 34-1/2 inches. These fenders come in either a quantity of one or two: - Quantity of 1: CE…
view full answer...Choosing the correct Timbren Axle-Less system will depend on a few things. First will be the weight capacity needed. Going off the 1,000 pound load you could be going up to, I am going to suggest a 2,000 pound set up. That being said, these do have…
view full answer...I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey #CE19502-2 and the larger 13" Black #CE19503-2. Both options represent the only color available from CE Smith in the respective sizes.…
view full answer...From inside to inside the mounting bracket should be spaced at 29-11/16 inches to mount the CE Smith Single Axle Trailer Fender part #CE19504-2.
view full answer...The CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 14" Wheels - Qty 2 #CE19504-2 and single fender #CE19504 will attach to your trailer's existing brackets. If your trailer doesn't have the brackets then you…
view full answer...We have a very close option with the #CE19503-2 which is off by only 1/4 of an inch to the measurements you listed. It measures 29-3/4 inch for the inside portion and 33-3/4 inch for the outside portion.
view full answer...The best option we'd have to replace the fenders on your trailer would be the Fulton Single Axle Trailer Fenders with Top and Side Steps part #F008584-2. The measurements we have for this fender appear to be very similar to that of the brackets…
view full answer...I went out to our warehouse for you and measured the CE Smith Single Axle Trailer Fender part #CE19504-2. The inside width at the bottom is around 10-3/4" and then 9-1/2" at the top.
view full answer...I do have an option for you but none of our free backing surge braking assemblies in this size have a parking brake feature. That said, we do have a surge brake assembly option with parking brake with the uni-servo backing plates, the Dexter…
view full answer...I went out to the warehouse to measure the CE Smith fenders #CE19503. The opening of the wheel well is approximately 27.5 inches long. I also took a picture of the underside for you.
view full answer...