Does Trailer Suspension Require the Use of Shackles
Question:
My trailer leaf spring set up is like the one in the picture from your website and the other pic is mine, there are not any shackles. I am in the process of replacing the leaf springs and every where I look there is a reference to shackles. Do I need them or no? If the trailer does not have them would there be an advantage to adding them when I replace the springs? Loaded up the trailer will be less than 1400 lbs so I have a 2000lb axle and looking for springs to match. Spring length - eye to eye is 26 and 1/2 inches. Please advise- thanks.
asked by: Kevin L
Expert Reply:
If you don't use shackles you don't give the leaf spring enough movement to flex since they stretch out as they compress. So without them your suspension wouldn't move much. I'd recommend you use a hanger kit like the part # APS4 which comes with the correct hangers as well as the shackles and bolts needed.
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Q&A: Mounting Hole Dimensions of CE Smith 12" and 13" Plastic Single Axle Fenders
- Shop: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 1
- Shop: CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2
- Q&A: How to Determine the Distance for Mounting Trailer Spring Hangers on a Single Axle Trailer
- Q&A: U-Bolts Needed To Attach The CE Smith Galvanized Steel Step # CE26212G Onto A Trailer Fender
- Q&A: Plastic Trailer Fender with Bracket Dimensions of Inner 30 inch and Outer 34
- Q&A: Replacement Fenders Needed for a 13" Wheel on a Tracker Trailstar Boat Trailer
- Q&A: Boat Fender Replacement Recommendation for Black Fender and 13" Wheels
- Video: CE Smith Trailer Fenders - Top and Side Step - CE19504-2 Review
- Video: CE Smith Trailer Fenders - Top and Side Step - CE19503-2 Review
- Shop: Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)
- Shop: Fulton Single Axle Trailer Fenders with Top and Side Steps - Black Plastic - 14" Wheels - Qty 2
- Shop: CE Smith U-Bolt - Galvanized - 3-9/16" Long x 1-5/8" Wide x 3/8" Diameter - Qty 1
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Shop: Fulton Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 14" Wheels - Qty 1
- Search Results: double eye leaf springs
- Search Results: leaf springs
- Shop: Trailer Hitch
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Search Results: dust caps
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Search Results: dust cap
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Video: CE Smith Trailer Fenders CE26098G-2 Review