CE Smith Trailer Fenders - Top and Side Step - CE19503-2 Review Video

L-brackets like the part #CE26098G-2 are a great option for installing the CE Smith Fenders part #CE19503-2. If the fenders will mount right up to the side of the trailer frame I would go with the #PF1135-BKT-2 though as this would be easiest way…

To install the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps #CE19503-2 you need 4 of the CE Smith Galvanized Steel Step #CE26212G. The mounting hardware isn't included because every trailer design is different so you can either…

I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey #CE19502-2 and the larger 13" Black #CE19503-2. Both options represent the only color available from CE Smith in the respective…

Thank you for the photos! According to my information and what you sent in, your best option for a replacement fender is the CE Smith Black Fender: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - #CE19503 (Qty 1) CE Smith Single Axle…

For the 13" #CE19503-2 there is a distance between the two outside mounting on center of 33-3/4 inches and 29-3/4 inches between the two inside holes. The holes on the mounting surfaces are spaced apart 5 inches vertically and 2 inches…

It looks like you got the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2 #CE19503-2. Assuming you have 13" wheels you did not order the wrong fenders. However, these do not come with mounting…

The fender mounting brackets to use with the CE Smith fenders part #CE19503-2 are the #PF1135-BKT-2.

Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part #HP29VR you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part #CE26098G-2. If you do not…

The mounting brackets you can use to attach the #CE19503-2 fenders on your trailer are part #PF775-BKT-2. There are 2 brackets in each package. These L-shaped brackets measure 1-1/2 inches wide, and one leg is 7-inches long, while the short leg is…

You are definitely going to need radial tires for highway speeds and the best option is the Taskmaster 4.80R12 Radial Trailer Tire #TT48012C. Radial trailer tires are constructed in a manner so they have cords which run at 90 degrees to the direction…

I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches. If these aren't an exact match, new holes can usually be drilled into the brackets to make them…

The Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs #20545I-EZ-60-15 is a great starting point to upgrade your trailer. This will give you a standard size axle with good bearings, hubs, and EZ-lube…