Correct Spacing for Triple-Axle Trailer Hanger Kit for 2 Slipper Springs with 10-1/8 Equalizers
Question:
Is there a drawing that shows the measurement for a.triple axle trailor . We.bought the setup ap 302 and h302 to replace what was.worn. everything underneath was rusted and falling off so we dont really know how to setup the equalizers. Can u help
asked by: David N
Expert Reply:
We sure can!
The spacing you're looking for between the hangers for the Triple-Axle Trailer Hanger Kit for 2" Slipper Springs # AP302-H302 is 28-1/2" for the first to second hangers, 33" from the second to third hangers, and then 28-1/2" from the third to the fourth hangers. This would allow you to use a 2" slipper spring like the 5-Leaf for 7K Axle # e74SR.
When it comes to exact placement of the hangers on the trailer frame that's something you'll have to play with to get the correct placement. The ideal locations will give your trailer a tongue weight that's 10-15% of the weight of the trailer.
Products Referenced in This Question
5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 7000 lbs
- 2 Inch Wide
- 5 Leaf
- 26-5/8 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Triple Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Q&A: Recommended Hanger Spacing for Triple-Axle Trailer Hanger Kit for 2" Slipper Springs
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Video: Redline Tandem Axle Trailer Equalizer Kit Review
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 13-4 Review
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Search Results: slipper spring hanger kit
- Shop: Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: Swan-Shaped Equalizer for 2" Wide Slipper Springs - 10-1/8" Long - 7/8" Center Hole
- Shop: Tandem-Axle Trailer Hangers for 2" Slipper Springs - 4-1/4" Front, 5-1/4" Rear
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Q&A: Torque Rating Requirements for Installing Leaf Springs on a 7000 lb Tandem Axle Trailer
- Q&A: Replacement Parts for Trailer Hub # 8-219-9UC3-A
- Shop: Dexter DX Series Electric Over Hydraulic Brake Actuator for Drum Brakes - 1,000 psi
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-219-9UC3-A Review
- Q&A: Different Size Equalizers on Triple Axle Trailer
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Why Do Trailer Suspension Equalizers Come in Different Shapes and Sizes
- Q&A: How To Determine Axle Rating Of Dexter Torsion Axles
- Video: Review of Redline Trailer Leaf Spring Suspension - Swan-Style Equalizers - AP302
- Search Results: leaf spring
- Shop: Trailer Hitch
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Trailer Wiring
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Article: Double-Eye Trailer Suspension System Review
- Search Results: equalizer
- Shop: Brake Controller
on Trailer Suspension Parts
