Should MORryde Equalizer Kit MR87ZR Or MR27ZR Be Used With 35" Axle Spacing?
Question:
I have Jayco 29RLDS with 2 4400lb. axles. I ordered wet bolts/shackles and MR87ZR. My axles measure 35inch center to center. My FHS measurement is 58 3/4. Did I the right equalizer or should I have 35inch MR27ZR. I think my springs are 26inch end to end. I have already installed these.
asked by: Steve J
Expert Reply:
As your axles measure 35" apart from center to center but the frame hanger spread (FHS) measured 58-3/4", you did go the correct way. The axle spacing is definitely important, but the FHS is more so. Just be aware that you axle spacing may change a little due to the MORryde Rubber Equalizers # MR87ZR being shorter than the # MR27ZR (quick diagram included), but this will be perfectly fine.
Products Referenced in This Question
MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Trailer Leaf Spring Suspension
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 8 Inch Long
- Tandem Axle
- MORryde
more information >
Product Page this Question was Asked From
MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Trailer Leaf Spring Suspension
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR
- Shop: MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
- Shop: Trailer Wiring
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Shop: Brake Controller
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Manufacturer Demo
- Q&A: Installing a MORryde MR27ZR on a 2020 Grand Design With Oddly Shaped Hangers
- Shop: Trailer Hitch
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Q&A: Is There MORryde CRE3000 that Could Fit Wheelbase of 31 inches
- Video: Blue Ox Hitch Receiver and Coupler Latch Lock Set Review
- Shop: Mud Flaps
- Search Results: safety chain attachments
- Search Results: morryde
- Video: Review of MORryde Trailer Leaf Spring Suspension - Equalizers - MR27ZR
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Installation
- Q&A: How to Determine Correct Equalizer Upgrade for Keystone Cougar
- Q&A: Recommended Dexter E-Z Flex Equalizers To Replace 6" Equalizers On Trailer
- Shop: Suspension Enhancement
- Search Results: mr87zr
- Q&A: Comparing Equa-Flex and Road Armor Equalizers For 2000 Forest River WIldwood W/ 5200lb Axles
- Q&A: Is Road Armor Equalizer Upgrade Better Than MORryde
- Article: How to Measure for Trailer Hitch Drop
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00