Trailer Hitch that Fits 2015 Ford F150 with OEM Hitch for Replacement

Question

Question:

I have a 2015 Ford F-150 XLT Crew Cab 4WD that has a factory installed hitch rated at 11000 pounds that needs replaced. Would the CURT model C14017 be a suitable replacement hitch for my truck or would you recommend another model? Thank you.

asked by: Keith R

0

Expert Reply:

We only have one hitch available that fits your 2015 Ford F-150 that has a factory hitch with the Curt Class IV part # C26HR which has a 10,000 lb trailer weight capacity if not using weight distribution or 12,000 lbs if using a WD system.

expert reply by: Jameson C

0

Answer 1

From my research regardless of how your truck is equipped you should have no problem meeting the 5,000 pound minimum because the lowest rated F-150 from 2017 has a towing capacity of 7,600 pounds. The exact capacity of your F-150 depnds on some other…

view full answer...

Answer 2

Curt has a hitch that does fit your 2018 Ford F-150 with a factory hitch with the part #C26HR which fits below the factory hitch, but the part #C14017 does not fit versions of your truck that do have the factory hitch.

view full answer...

Answer 3

The appropriate fishwire is included with the Curt Trailer Hitch Receiver #C26HR that fits your 2021 Ford F-150 without a factory hitch. I have added a cut out from the installation instructions for you which show the parts included. So the hitch…

view full answer...

Answer 4

The Curt hitch #C26HR is a great higher capacity trailer hitch for your 2018 Ford F-150 Raptor as it is rated for up to 10,000 lb trailer weight. This fits if you have the factory hitch which it sounds like you have. If you instead didn't have…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver part #C14017 and Curt Trailer Hitch Receiver part #C26HR (C14021) which are both fits for a 2015 Ford F-150 are designed for models with a factory rear bumper. That said, they are also both fits for Raptor models so if…

view full answer...

Answer 6

The Curt #C14017 will fit your 2018 Ford F-150 FX4 as long as you do not have a factory hitch installed. This is a fairly simple installation, we give it a 4 out of 10 for difficulty with a 40 minute install time. No cutting or drilling is required…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Trailer Hitch that Fits 2015 Ford F150 with OEM Hitch for Replacement

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching