Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights

Question

Question:

i need a replacement for 122r/122y light or cover yello

asked by: Donald S

0

Expert Reply:

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use as replacements.

I recommend checking out the Command LED lights # 328-K-51 for amber and # 328-K-52 for red. These measure 4" long x 1-1/2" tall and have mounting holes that are spaced 3" apart on center.

Attached are links to review videos and our selection of clearance lights that you can filter through as well.

expert reply by: Jon G

0

Marlin

4/1/2024

Your listed suggestions have different sizes shown. 328-K-51 and 328-L-52

Reply

Jon G.

4/2/2024

@Marlin Thanks for reaching out! We just found out about a design change with these lights where the dimensions are slightly different than they used to be. One of the pages has already been updated and the other one is in the process of being updated. The correct dimensions for both # 328-K-51 and # 328-K-52 LED Lights are 4" long x 1-1/2" tall x 1/2" deep.

Reply

Answer 1

The globrite 122 in red or yellow/amber are 3.75 inches by 1.70 inches from what I can find online. We do not have a direct replacement, however the closest dimension we have to replace them is 3-1/2 by 1 inch. I recommend the #MC68RB and #MC68AB.…

view full answer...

Answer 2

I do have an option but Glo-Brite is no longer in business so you won't be able to get any replacement parts for these lights such as lenses. The only option you have would be a full replacement for which the most similar option we offer is…

view full answer...

Answer 3

I do have an option for you but the Winnebago 147680-02-01A (Glo-Brite 122Y) is discontinued and no longer available. Therefore, you'll have no other option but to replace the light entirely but not to worry, this is actually very simple. I…

view full answer...

Answer 4

The Optronics LED Clearance or Side Marker Trailer Light is available in Red #MCL0030RBB and Amber #MCL0030ABB. These are the closest replacements to the Glo Brite 122r/122y lights you have. The lights only have one LED diode versus the 3 in your…

view full answer...

Answer 5

The most likely cause for the turn signals not to work when the running lights are on with your trailer is a bad or weak ground. It's very possible that a weak ground connection can be just strong enough to allow sufficient current for some…

view full answer...

Answer 6

If you need to convert a 3 wire system on a motorhome to a 2 wire system on a standard trailer or towed vehicle, then the Roadmaster Brite-Lite Wiring Converter #RM-732 is the correct fit and is compatible with LED lights. I've attached a diagram…

view full answer...

Answer 7

Though we do not sell the lens separately. You can purchase The LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens #328-K-52, The overall dimensions are 3-3/4 inch long x 1-5/8 inches tall x 1/2 inch deep. I…

view full answer...

Answer 8

I recommend using Clear Silicone #FAS59FR when installing the LED Trailer Clearance or Side Marker Light #328-K-51. This will allow you to seal the hole for the wiring as well as the holes for the screws. A Caulk Gun #PTW54295 is needed for the tube…

view full answer...

Answer 9

The SAE number you provided is merely an identifier that states that the lamp conforms to certain DOT regulations. The Glo-Brite 410 has been discontinued and is no longer available. The closest replacement we offer is the Optronics #MCL48AB which is…

view full answer...

Answer 10

The globrite 122 in red or yellow/amber are 3.75 inches by 1.70 inches from what I can find online. We do not have a direct replacement, however the closest dimension we have to replace them is 3-1/2 by 1 inch. I recommend the #MC68RB and #MC68AB. If…

view full answer...

Answer 11

For your rear dually wheels the Wheel Masters 4-Hose Inflation Kit #WM8001-135 is the best kit for your set up. This will allow you to mount the fill points near your hub center for much easier access. The front wheels will need the Wheel Masters…

view full answer...

Answer 12

We have some replacement clearance lights that are similar to the Glo-Brite lights, but unfortunately we do not carry Glo-Brite brand, and from what I understand they have gone out of business, so I do not have the exact lens covers that you are…

view full answer...

Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching