Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
(29 reviews)
Price: $249.94
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Item # C26HR
Retail:$424.95
Our Price: $249.94
You Save: $175.01
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (29)
- Q & A (0)
- Photos
CURT Trailer Hitch - C26HR
- Class IV
- 2 Inch Hitch
- 10000 lbs GTW
- Visible Cross Tube
- CURT
- 1000 lbs TW
- 12000 lbs WD GTW
- 1200 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Assembled in the USA
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 10,000 lbs
- Maximum GTW when used with weight distribution: 12,000 lbs
- Maximum tongue weight: 1,000 lbs
- Maximum TW when used with weight distribution: 1,200 lbs
- Maximum gross trailer weight: 10,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
C14021 CURT Class 4 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2015 - 2024 Ford F-150 with factory hitch
- 2017 - 2024 Ford F-150 Raptor with factory hitch
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - C26HR
Average Customer Rating: 4.4 out of 5 stars (29 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Robert12/12/2023
Was able to install with 1 person, used floor jack to support. Full size OEM spare fits for 18" tires - but tight fit - cant have a larger spare. less then 5 stars as the fit is a little short - should be 1/4" wider. Hitch does not meet metal to metal on the lower brackets, even with the spacers installed. The spacers are loose behind it because of the short length.
by: Michael 01/25/2024
Trailer is always good. Reasonable price, fast delivery. That's why I keep coming back
by: Jason 04/10/2024
Couldn’t be happier.
by: Kevin03/16/2023
I thought this would be a replacement of the stock receiver but it is designed to mount underneath the stock receiver which looks terrible and would most certainly reduce the departure angle for off-road use. I didn't install it and had to take a big loss selling it on FB because I waited too long to return it to E-trailer. A better option if your stock receiver is worn out is to buy an aftermarket bumper and a new receiver that will mount in the same place as the stock receiver. Live and learn.
by: Ben 07/26/2023
2020 Ford F-150
Nice product; handles tongue weight’s that exceed the factory receiver. Super straight forward, easy install.
by: Ronald12/21/2023
Great product, price, shipping and customer service!
by: Sarge02/08/2023
The hitch is definitely heavy duty (also heavy) but it hangs about 6" down below the bumper. That would not be a problem except for dragging in rough terrain. The paper instructions were not too good but the video from etrailer cleared it all up.
by: Lysa11/25/2023
Fast service, went in fast and easy.
by: Howard 01/27/2023
Arived on time and easy installation. All parts fit with mo adjustments necessary
by: Arthur08/29/2022
Product as described. Just like other reviews have said, my box came destroyed too. Saving grace was the hardware was taped very well to the hitch. Good quality.
by: Scott 05/20/2023
2021 Ford F-150
Direction are not real clear. Maybe redo them. If possible make the bolts just a tad longer. Other than that great product.
by: Thomas 03/12/2023
I have only been able to use it once for a hour and 45 minute drive and it was superb.
by: Chris 10/31/2021
Very easy to install! Solid built hitch and American made!!
by: Bradford 01/21/2022
2018 Ford F-150
The box from shipped through UPS was completely trashed, other the that I get to install it this weekend, to see how it fits.
by: Wendle01/14/2022
Great hitch, great price, fast service, the printed directions could have been clearer but I figured it out.
by: Robert T09/13/2022
Love this hitch
by: Ismael 01/23/2022
Appearance is one of a quality item.
by: Aaron 09/25/2022
by: Kurt 03/06/2024
by: Jack 01/22/2024
by: Jim03/09/2023
by: Glenn 02/02/2024
2023 Ford F-150
by: Ronny12/30/2021
2021 Ford F-150
by: Richard 06/23/2023
2018 Ford F-150
by: Greg 09/15/2021
25
29
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch Recommendation for 2015 Ford F-150 for Towing 10k TrailerFor a 10,000 lb rated trailer hitch confirmed to fit your 2015 Ford F-150 without a factory hitch you would want the part # C26HR. I attached an install video for this for you to check out as well. You will need a brake controller to activate the brakes of your trailer. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller...
view full answer... - Hitch and Wiring Recommendation For 2019 Ford F-150 XLTThe 2019 Ford F-150 XLT with the hitch ball bumper would in fact need the hitch that fits the trucks without a factory hitch. Fords that are considered with factory hitch will have an actual receiver tube instead of the bumper with built in hitch ball mount. The Curt Trailer Hitch Receiver Class IV hitch part # C26HR is a great choice. It is rated for 1,000 lb tongue weight and does not require drilling for installation. It is also a concealed cross tube design so the only portion of the...
view full answer...
- Recommended Trailer Hitch for 2018 Ford F-150 without Factory HitchFor your 2018 Ford F-150 I recommend the Curt Class IV Trailer Hitch Receiver # C26HR because it has the highest weight capacities among the hitches available for your truck (10,000 towing and 1,000 tongue) and also features a nice hidden design where only the 2 inch receiver will be visible. It will use existing holes in the truck's frame for a no-drill installation and is made right here in the USA. I have attached an installation video on the 2018 F-150 that you can also use for reference.
view full answer...
- Trailer Hitch Fit for 2019 Ford F150 With Factory HitchThe Curt # C14021 which we sell as part # C26HR replaces the 14017. For your 2019 Ford F-150 with the factory hitch, the # C26HR is a confirmed fit. The hitch has a 10000 lb towing/1000 lb tongue weight capacity which increases to 12K/1.2K if weight distribution is used. I've linked to the installation instructions for you.
view full answer... - Compatibility of Trailer Hitch with 2018 Ford F-150 Max Towing CapacityUnfortunately there is not a Class V hitch rated for over 12000 lbs towing from any of our manufacturers for your 2018 Ford F-150. The best hitch we currently offer # C26HR is rated for 12,000 lbs and 1200 lbs tongue weight when used with weight distribution and is made by Curt in the USA. Based on your specifications you must have the 3.5L GTDI V6 SuperCrew with 20 inch tires and wheels and the 3.55 axle ratio because that is the only option rated higher than this hitch. If so, unfortunately...
view full answer... - How Visible is Curt Hitch # C26HR When Installed on 2020 Ford F-150I attached a couple pictures that show how well concealed the Curt hitch part # C26HR is when installed on a F-150 like your 2020 model. Basically only the hitch opening hangs below the rear bumper which allows it to be as hidden as possible! I also attached an install video for this for you to check out as well.
view full answer...
- Towing Capacity of 2016 Ford F-150 with 5.0L EngineI took a look at the online towing chart for your 2016 Ford F-150 and it lists a maximum trailer weight of 10,000 pounds for your F-150 model that is equipped with the 5.0L engine, 3:55 axle ratio, and 145 inch wheelbase. I do recommend verifying this information in your copy of the owner's manual or by checking with a local Ford dealer. I am not sure what your truck is already equipped with in terms of towing components so I will recommend all the parts you would need in order to tow...
view full answer... - Wiring Harness for 2016 Ford F-150 Without Tow PackageTo help you determine which wiring harness will work on your 2016 Ford F-150 you can look for the connector that's under the truck's bumper. If the connector is round and looks like it will match up with picture # 1 that I've attached then you can use # 74682 and plug it right in to give you both a 7-way and 4-way trailer connector. If you find a connector that is more rectangular like in picture # 2 then you can use # C56110 which will give you a 4-way connector. If this is the case...
view full answer...
- High Capacity Trailer Hitch for 2018 Ford F-150 RaptorThe Curt hitch # C26HR is a great higher capacity trailer hitch for your 2018 Ford F-150 Raptor as it is rated for up to 10,000 lb trailer weight. This fits if you have the factory hitch which it sounds like you have. If you instead didn't have the factory hitch you would want the part # C14017 which has same weight capacity.
view full answer... - Is an Aftermarket Transmission Cooler Needed for Towing with a 2016 Ford F-150 Without Tow PackageAccording to a brochure from Ford regarding the trailer tow package for a 2016 Ford F-150 it includes a 4-Way/7-Way connector combination, a Class IV trailer hitch, their Smart Trailer Tow Connector, Pro Trailer Backup Assist, auxiliary transmission cooler, and upgraded front stabilizer bar. I can help you with some of those things but there are things like the Smart Trailer Tow Connector, Pro Trailer Backup Assist, and front stabilizer bar that you would need to contact your local Ford...
view full answer...
- Will Multi-Fit Class IV Trailer Hitch Fit 2018 Ford F-150We do not currently carry the Reese Towpower Multi-Fit Trailer Hitches so I cannot be sure if the particular Class IV hitch you are looking at will fit your 2018 Ford F-150. I will say though that multi-fit trailer hitches are going to require a much more involved installation process that will likely require drilling into the truck's frame or other vehicle modifications. For a Class IV hitch that is confirmed to fit your 2018 Ford F-150 and won't require any drilling I recommend looking...
view full answer... - Roof Rack Needed for Carrying a Gheenoe with a 2017 Ford F-150I do have a roof rack recommendation for you to carry your Gheenoe with your 2017 Ford F-150 but as far as weight capacity goes I couldn't find anything in the online version of your owner's manual. I recommend contacting your local Ford dealer for that information. For a roof rack I recommend the Rhino-Rack system which consists of the Vortex Aero Crossbars # RRVA150B-2, 2500 Series Legs # RRRLKVA, and DK Fit Kit # DK427. This roof rack has a 165 lb weight capacity, but if you find out...
view full answer... - Class IV And Class III Hitch For A 2018 Ford F-150 Raptor The Draw-Tite Ultra Frame Trailer Hitch Receiver # DT35MR will not fit your 2018 Ford F-150 Raptor. However, if you still need a heavier duty hitch, and have a factory hitch currently, the Curt Trailer Hitch Receiver # C26HR is confirmed to fit your Raptor and will work great. This hitch has a maximum towing capacity of 10,000lbs and a maximum tongue weight of 1,000lbs. If you do not have a factory hitch installed, then I recommend another alternative like the Curt Trailer Hitch Receiver...
view full answer... - Class III Trailer Hitch that Fits 2016 Ford F-150 With Factory HitchI have a hitch that does fit your 2016 Ford F-150 with a factory hitch, the Curt Trailer Hitch # C26HR.
view full answer... - Will Curt Trailer Hitch # C26HR Fit a 2016 Ford F-150 with Aftermarket Rear BumperComparing your rear bumper with the stock one on the 2016 Ford F-150 it is hard to tell if yours hangs down any further than the stock bumper. If it does not hang lower then you will be able to use a trailer hitch. If it does hang lower then the bumper would have to be modified or replaced to install a hitch such as # C26HR.
view full answer... - Trailer Hitch Availability for 2015 Ford F-150 and Range of Towing CapacitiesWe have a pretty wide range in capacity for the hitches we offer that fit your 2015 Ford F-150 that does not have a factory hitch. We have the # C86HR on the low end which has a trailer capacity of 6,000 lbs and a tongue weight capacity of 900 lbs. On the higher end we have the # C26HR which has a 10,000 lb total trailer capacity and a 1,000 lb tongue weight capacity. Depending on how your truck is equipped it could have an overall towing capacity of 5k to 9.1k. Realistically the hitches...
view full answer... - Will Draw-Tite Ultra Frame Trailer Hitch Receiver Fit 2018 Ford F-150 With Factory HitchThe Draw-Tite # DT35MR will only fit the 2018 Ford F-150 without the factory hitch. According to Draw-Tite, even if you remove the factory hitch it won't fit. The older Q&A was incorrect and I apologize for the confusion. The best option for a hitch that will fit along with the factory hitch is the Curt # C26HR. This has a max gross trailer weight of 10,000 lbs.
view full answer... - Trailer Hitch Recommendation for 2018 Ford F-150 with Factory Trailer HitchAccording to my research you want to avoid removing the factory trailer hitch on your 2018 Ford F-150 because it's a little more integrated than an aftermarket hitch. So for your application I recommend going with the Curt Class IV # C26HR instead because it mounts directly under your factory receiver instead of having to remove the factory setup.
view full answer... - Best Add-On Trailer Hitch for a 2017 Ford F-150 XLTThe best trailer hitch receiver we have for your 2017 Ford F-150 is the Curt Trailer Hitch Receiver part # C26HR. The Curt Trailer Hitch Receiver is made right here in the USA and it has a 10,000 lb maximum gross trailer weight rating. It also comes with a lifetime warranty and offers a completely bolt-on, no-drill installation. In order to complete your towing setup you may also need a wiring harness, ball mount/hitch ball, and possibly a brake controller if your trailer has electric...
view full answer... - Can Factory Trailer Hitch on 2019 Ford F-150 Be ReplacedThe factory trailer hitch on a 2019 Ford F-150 cannot be removed as it's tied into the bumper supports. The only trailer hitch options we offer are for models without a factory hitch or to add a second hitch below the factory with the Curt Trailer Hitch Receiver part # C26HR.
view full answer... - Trailer Hitch with Most Capacity for 2019 Ford F-150 TruckThe trailer hitch with the most capacity that fits your 2019 Ford F-150 is the Curt # C26HR, which has a 1,000 lb tongue weight capacity and 10,000 lb towing capacity. This is a Class IV hitch with a 2 inch receiver that is a complete bolt-on installation which does not require any type of drilling into your truck's frame. This hitch has a mostly hidden crosstube, as you can see in the accompanying photo, so your 2019 F-150 can maintain its factory appearance. The Curt # C14017 is made...
view full answer...
- Is the Curt Trailer Hitch Receiver C26HR a Confirmed Fit For a 2022 Ford F-150 Raptor Yes, the Curt Trailer Hitch Receiver # C26HR is a confirmed fit for your 2022 Ford F-150 Raptor as long as you have a factory hitch. This hitch is made in the USA and will provide you with a Class IV hitch that has a 2" receiver opening. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you do not have a factory hitch, then you would want to go with the Curt Trailer Hitch Receiver # C86HR which is a class III...
view full answer... - Highest Capacity Hitch Available for 2021 Ford F-150The highest capacity receiver hitch we offer for the 2021 Ford F-150 would be the Draw-Tite Class V hitch, part # DT35MR which has an 11000 lb towing/1100 lb tongue weight capacity for standard towing or 14000 lbs towing/1400 lbs tongue weight capacity if used with a weight distribution system. The hitch will fit your truck, as long as you have the factory step bumper. If you don't have the factory step bumper, you'll want to use the Curt Class IV hitch, part # C26HR which has a 10000...
view full answer... - Trailer Hitch that Fits 2015 Ford F150 with OEM Hitch for ReplacementWe only have one hitch available that fits your 2015 Ford F-150 that has a factory hitch with the Curt Class IV part # C26HR which has a 10,000 lb trailer weight capacity if not using weight distribution or 12,000 lbs if using a WD system.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video by:
Chris R
Video by:
Rick G
Updated by:
Wilson B
Updated by:
Noah M
Updated by:
Manda E
Video Edited:
Jonathan Y
Video Edited:
John S
Test Fit:
Jacob H
Test Fit:
Ryan G
Written by:
Eric H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
1/28/2022
I will have our customer service team reach out to you.