Curt Trailer Hitch Installation - 2017 Ford F-150 c14017 Video

In order to install a 7-way trailer connector on your 2017 Ford F-150, you are first going to need to install a 4-way trailer connector and then a 4 to 7-way trailer connector. For this, I recommend using the Hopkins Plug-In Simple Wiring Harness…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The appropriate fishwire is included with the Curt Trailer Hitch Receiver #C26HR that fits your 2021 Ford F-150 without a factory hitch. I have added a cut out from the installation instructions for you which show the parts included. So the hitch…

The Curt #C14017 will fit your 2018 Ford F-150 FX4 as long as you do not have a factory hitch installed. This is a fairly simple installation, we give it a 4 out of 10 for difficulty with a 40 minute install time. No cutting or drilling is required…

From my research regardless of how your truck is equipped you should have no problem meeting the 5,000 pound minimum because the lowest rated F-150 from 2017 has a towing capacity of 7,600 pounds. The exact capacity of your F-150 depnds on some…

We only have one hitch available that fits your 2015 Ford F-150 that has a factory hitch with the Curt Class IV part #C26HR which has a 10,000 lb trailer weight capacity if not using weight distribution or 12,000 lbs if using a WD system.

The Curt Trailer Hitch Receiver part #C14017 and Curt Trailer Hitch Receiver part #C26HR (C14021) which are both fits for a 2015 Ford F-150 are designed for models with a factory rear bumper. That said, they are also both fits for Raptor models so…

Curt has a hitch that does fit your 2018 Ford F-150 with a factory hitch with the part #C26HR which fits below the factory hitch, but the part #C14017 does not fit versions of your truck that do have the factory hitch.

The Curt hitch #C26HR is a great higher capacity trailer hitch for your 2018 Ford F-150 Raptor as it is rated for up to 10,000 lb trailer weight. This fits if you have the factory hitch which it sounds like you have. If you instead didn't…

I wouldn't be concerned with the gap on the ends of your cross tube. The only thing that matters is that the 4 bolts that you use to install the #DT35MR are snug and secure. Assuming you have installed these correctly, and used the proper…

While we do have a hitch option for your 2018 Ford F-150, you won't be able to use the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2" #DT35MR. This is because the Draw-Tite is designed for truck frames…