Towing Package For A 2016 Nissan Quest

Question

Question:

Looking to order a trailer hitch and wiring for a Nissan Quest. It is for one of our customers. The description Is saying thatw e need a power converter module . Can you please give me a complete brake down of what I would need with part Numbers so I can run it by my customer. They Want the hitch with the heaviest ratings. We found that We are having trouble with finding the correct wiring items. Please Respind ASAP

asked by: Ryan Brown

0

Expert Reply:

The etrailer Trailer Hitch Receiver - Custom Fit # e98KR has the heaviest rating of the hitches that are confirmed to fit your 2016 Nissan Quest.

The trailer hitch has a bolt-on installation with no welding required. It has a matte black powder coat finish which is over a protective base coat that offers a superior rust resistance.

The trailer hitch has a maximum gross trailer weight up to 3,500 pounds and has a maximum tongue weight up to 300 pounds. I would recommend checking the vehicle's manual to find out the proper towing capacity for your vehicle.

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56342 will give you a 4-flat connector which will make it to where your trailer's stop, turn and taillights will mirror your vehicle's stop, turn and taillights. This custom-fit T-Connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.

The Curt Towing Starter Kit # C45554 includes an 8-1/4 inch long, powder coated ball mount with a pre-torqued hitch ball; hitch pin and clip; hitch receiver lock with keys; hitch cover; and a storage case.

I attached an installation video link below.

expert reply by: Noah E

0

Answer 1

The ground clearance is going to be the same for you 2016 Nissan Quest with both the Curt Trailer Hitch Receiver #C13078 and etrailer Trailer Hitch Receiver #e98KR. These are actually the same hitch, just with a different powder coat, which is why…

view full answer...

Answer 2

According to your Owner's Manual for your 2014 Nissan Quest, your vehicle is rated for a maximum tongue load of 350 lbs, so your vehicle in this case will limit the load because it is not rated as high as the hitch. I recommend the Draw-Tite…

view full answer...

Answer 3

Suspension Enhancement would assist with keeping your vehicle from dropping in the rear. Unfortunately there is not currently any vehicle suspension enhancement from any of our manufacturers that is confirmed to fit your 2015 Nissan Quest.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...