Curt T-Connector Vehicle Wiring Harness Installation - 2017 Nissan Quest Video

The Curt Trailer Hitch Receiver part #C13078 is indeed a correct fit for your 2016 Nissan Quest. I have taken a look at the photo you attached and it looks like you are using the wrong set of holes. The trailer hitch will need to move back one set of…

The etrailer Trailer Hitch Receiver - Custom Fit #e98KR has the heaviest rating of the hitches that are confirmed to fit your 2016 Nissan Quest. The trailer hitch has a bolt-on installation with no welding required. It has a matte black powder coat…

For the most reliable and safe connection possible, Curt recommends obtaining the power for the controller directly from the vehicle battery and running the circuit through a 30 amp breaker like what's provided with the #ETBC7. This way, you can…

Instead of extending the black wire from the 7-Way plug in 7-way upgrade kit part #ETBC7 to the battery under the hood you would extend the black wire from the plug to the positive side of the battery in the back of the vehicle with a 40 amp circuit…

Sounds like the harness is getting overdrawn by your trailer wiring which is shorting it out and causing it to fail and then also causing the lights on the vehicle to stay on. Does the trailer have a lot of lights on it? We don't have the best…

Congratulations on the new trailer! I looked up your new 2021 Jayco 154BH travel trailer, and it has a Gross Vehicle Weight Rating (GVWR) of 3450lbs. Your 2015 Nissan Quest has a maximum towing capacity of 3500lbs, which matches the Curt Trailer…