LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens
(34 reviews)
Price: $10.81
In Stock
LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens
Item # 328-K-58LB
Our Price: $10.81
In Stock
- All Info
- Reviews (34)
- Q & A (0)
- Videos (2)
- Photos
Command Electronics Trailer Lights - 328-K-58LB
- Clearance Lights
- Rectangle
- LED Light
- Amber
- 3-3/4L x 1-3/4W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Non-Submersible Lights
- Command Electronics
3-3/4" x 1-3/4". Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.
Features:
- Small, rectangular trailer light functions as either a clearance or side marker light
- Built-in reflex reflector removes the need for a separate reflector
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate base with acrylic lens
- Amber lens with amber LEDs
- Compatible with 12V DC systems
- Mounts on surface of trailer - hardware not included
- 2-Wire pigtail includes power lead and ground wire
- P2 rated light produces a 90-degree beam pattern
- DOT and SAE compliant
- Assembled in the USA
Specs:
- Overall dimensions: 3-3/4" long x 1-3/4" wide x 15/16" deep
- Distance between mounting holes (center to center): 3"
- Diodes: 2
- Power draw at 12V: 0.05 amps
- Wire length: 4-1/2"
- 1-Year limited warranty
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Surface-Mount Light
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
K-58LB Command Electronics Modern LED Clearance or Side Marker Light w/ Reflex Reflector - Rectangular - Black Base - Amber Lens - Surface Mount - P2 Rated
Video of LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Command Electronics Trailer Lights - Clearance Lights - 328-K-58LB Review
Speaker 1: Today we're taking a look at a LED clearance or side marker light with a built in reflex reflector. This small rectangular trailer light functions as both a clearance light and a side marker light when properly mounted. It's an LED system. LEDs make great replacements for incandescent lights. They last longer, they burn brighter, and they're much more efficient. With LEDs, you don't have to worry about replacing bulbs or worry about brittle filaments.
This unit features an amber lens, again, with the reflex reflector built it. It mounts directly on the surface of the trailer. Mounting hardware's not included. To gain access to the mount holes, you just need to remove the lens. You can do that by placing a flat blade screwdriver direction in here on either side, there's a little spot for it, and then just prying the lens off.On the back, you can see it's a two wire pig-tail, so we have our power wire and our ground wire.
White is for ground, yellow is for power. This is SAE approved, and it is a P2 rated unit. Taking a look at the overall dimensions, starting with the overall length, edge to edge measures three and 7/8 inches. Edge to edge going this direction, is one and 7/8. And the overall depth from the front of the lens to the back of the housing right here, you get a measurement of about 13/16 of an inch deep.The mount holes on the unit are separated on center by three inches.
We're gonna go ahead and hook it up to power, that way you can see what it looks like with some power running to it. And we'll also be able to turn off our overhead lights, so you can see it in a low-light setting. So here you can see the light sends out a nice consistent signal. You can really see that reflex reflector that's built into the lens. When it comes to the number of LEDs, that's a two-diode system or a two-LED system, so the multi-diode design really helps optimize the overall light output.And that's gonna do it for today's look at the LED amber clearance or side marker light with the built in reflex reflector..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens - 328-K-58LB
Average Customer Rating: 4.9 out of 5 stars (34 Customer Reviews)
3-3/4" x 1-3/4". Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.by: Kimberly 03/22/2024
Just received my light. Have not installed it yet, but I’m sure it will work just fine. I have order from here for years for all my RV needs and never had any problems.
Thank you
by: William 04/10/2024
Quality lights,I have purchased them be fore.
by: Stanley T01/02/2024
After a year, still working great!
by: Kevin 02/05/2024
Just what I needed and arrived very qui ckly
by: Neil07/22/2021
I needed blinker lights on the front of my '50 IH pickup. These replaced the parking lights. Works great!
by: Ryan 11/14/2023
Great experience. Fast shipping and communication. Would buy from again. A++
by: Janet 06/06/2023
Very good light, great customer service.
by: Alan 04/27/2021
I ordered a Command LED amber side marker light, K-58LB, to replace a like one on my 2017 Coachmen Freelander Class C motorhome. It's an exact replacement. E-Trailer price was about average but their low shipping cost brought the total price way down below all the other online businesses. E-trailer shipped it first class and I received it in 4 days total, including the weekend. E-trailer has always been my online first stop for RV parts.
by: Mark05/22/2018
Your company provided exactly the repair parts I needed for my Curt hitch. Was also time to change the red or yellow clearance lights on my motorhome. You had exactly what I needed. Parts arrived quickly and I've already installed them. Thanks for your help.
by: David06/01/2019
I got these LED marker lights to replace my old light bulb marker lights. They were just what I ordered and received them with in a weeks time.
by: John 04/14/2023
Just what I needed. A perfect fit!
by: Dave 06/24/2021
Direct replacement and very easy to install. They look great.
by: Fred03/18/2022
Installed this today and it works perfectly. Was very pleased with the price and delivery timing from etrailer,com.
by: Kaivon08/18/2020
Fast delivery, reasonable price, Exact replacement (and as advertised), fast install. Happy with purchase experience.
by: Tom 11/03/2022
Just like factory
by: Joseph 09/04/2022
easy to order and fast delivered
by: Joseph 08/22/2022
easy to place orders and fast delivered
thanks again
by: Jeffery 08/17/2022
Quick shipping and product was installed today and works great. I will ordered from you guys again soon, thanks!
by: Antonio 10/28/2021
Great product, great price and great company. Will definitely come back.
by: J Wilson09/24/2020
Everything was perfect when it arrived
Thanks!!
by: Louis07/23/2018
Product was delivered on time and in great condition
Thank you
by: Thomas 07/11/2022
good value
by: Barker03/29/2019
Great item. Didn’t realize it was LED. PLEASANTLY SURPRISED. PERFECT fit.
by: Don 12/05/2023
by: Troy 03/21/2024
25
34
Show More Reviews
See what our Experts say about this Command Electronics Trailer Lights
- Recommended 4" x 2" Rectangular Command Trailer Marker/Clearance LightIt sounds like you're looking for a pretty typical 4" long x 2" wide rectangular trailer marker/clearance light like the LED Trailer Clearance or Side Marker Light part # 328-K-59LB for red or part # 328-K-58LB for amber. If that is the case then we have many options for you from multiple manufactures, of which I have attached below.
view full answer... - Replacement Amber LED for Glo Brite Assembly on Raptor Trailer Glo Brite is indeed out of business, but we may have an amber LED assembly that will work nicely as a replacement to your broken unit. The closest LED assembly we have available to the measurements you provided is with the Command LED Clearance or Side Marker Light # 328-K-58LB. This rectangular light measures 3-3/4 inches long, 1-3/4 inches wide, and 15/16 inches deep. The distance between the mounting holes, center to center, is right at 3 inches. I have attached a short video demonstration...
view full answer...
- What Gauge Wire Does The LED Trailer Clearance or Side Marker Light # 328-K-58LB Use?The LED Trailer Clearance or Side Marker Light # 328-K-58LB uses 20 gauge wire. For a Butt Connector I recommend the Deka Heat Shrink Butt Connector # DW05743-5.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Video Edited:
Joshua S
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Wilson B
Updated by:
Justice A
Edited by:
Daron K
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.