How Many Roller Bunks are Needed for a 22 Foot Sea Doo Jet Boat and Trailer
Question:
I own a 22 foot Sea Doo Jet Boat. I want to add rollers to the bunk trailer and I am interested in buying yur DL-21740 rollers. I have two questions. Do these come in Pairs? The second is do I need to cover the entire length of the bunks or part of them? I have difficulty with the boat on and off the trailer as the front part of the boat seems to catch on the way on and off the boat. Maybe the design of the boat or the trailer. Not sure but these rollers seem to be the answer. The second question is do you have any idea how many I would need for a 22 foot boat?
asked by: Dale C
Expert Reply:
The boat trailer roller bunks # DL21740 and # DL21741 come in pairs. When you put roller bunks on the trailer you will want them to cover everywhere that the boat currently makes contact with the existing wooden or carpeted bunks you are using now. The bunks can be cut if needed to fit. Basically it is better to have too many than not enough.
The roller bunks # DL21741 have a total capacity of 3,000 pounds per set and # DL21740 have a capacity of 2,500 pounds per set so you will need to order them not only based on length but also for the weight of the boat. Adding roller bunks to existing bunks will also make the boat ride a little higher on the trailer so that may or may not require other roller or stop adjustments on the trailer.
Products Referenced in This Question
Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can Dutton-Lainson Roller Bunks Accommodate 6,000 Pound 27 Foot Regal Ventura Boat
- Q&A: Roller Bunks Rated for More Than 1,500 lbs
- Shop: CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Shop: CE Smith Keel Roller for Boat Trailers - Self Centering - PVC - 12" - 5/8" Shaft - Amber
- Shop: Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21741 Review
- Search Results: 44649
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Trailer Hitch
- Shop: Grease Seals 10-36 (pair)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Search Results: 68149
- Shop: Trailer Wiring
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 25580
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: Trailer Tire Sizing
- Shop: Fifth Wheel Hitch
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: dust cap
- Video: Aries AdvantEdge Headache Rack Review
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Shop: Suspension Enhancement
on Boat Trailer Parts
