Install Instructions Link for Lippert Lift Kit # LC382741

Question

Question:

Can you send me the instructions?

asked by: Andy G

0

Expert Reply:

I attached a link to this page that has the install instructions for the Axle Riser Kit # LC382741 that you referenced.

expert reply by: Jameson C

0

Answer 1

Thanks so much for the photos, and based on those, your 2018 Liberty Outdoors Little Guy Max travel trailer has a 3,500 lb Lippert square torsion axle, for which we do have the correct lift kit, which is the following: - Axle Riser Kit - Single…

view full answer...

Answer 2

The washers that come with the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift part #LC382741 are not lock washers. The mounting bolts need to be torqued down to 120 ft-lbs, as long as you torque them down to the 120 ft lbs in the…

view full answer...

Answer 3

The Axle Riser Kit - Single Square Torsion Axle part #LC382741 will lift both sides of the trailer frame up 3-1/2" to add clearance between the frame and the axle. To install the axle riser kit you want to raise the trailer one side at a time by…

view full answer...

Answer 4

If you have a Lippert 3,500 lb Square Torsion Axle then the correct lift kit is the Axle Riser Kit part #LC382741. That said, none of the Dexter Torflex Lift Kits like part #K71-725-02 will work.

view full answer...

Answer 5

When choosing the correct weight distribution system for your trailer, you'll want to consider what the fully loaded weight of the trailer will be; the tongue weight should be anywhere between 10% and 15% of that when loaded. For reference, the…

view full answer...

Answer 6

The correct axle riser kit for your Lippert Torsion Axle is the part #LC382741. I confirmed with my contact at Lippert that the spacing for the mounting will match up and it is compatible with your mounting holes being on the top.

view full answer...

Answer 7

I do have an option for you but the Dexter Over Under Conversion Kits are only available for 2-3/8" and 3" diameter axles and I don't think you will have either one of them due to the trailer being so small. That said, we still do have…

view full answer...

Answer 8

The Keystone Hideout 262LHS has leaf spring axles which are overslung meaning they are under the leaf springs. Therefore you already really have the setup with the most amount of ground clearance but there is one other thing you can do which is to…

view full answer...

Answer 9

There are some great solutions to lifting the suspension on your horse trailer. I contacted Lippert and they were able to confirm that your axle is a Diamond Torsion Axle, so the Axle Riser Kit #LC382741 will work. Using this kit will give you an…

view full answer...

Answer 10

To find out the exact distance, we went ahead and measured the distance between the bolt holes of the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift #LC382741. When we measured, we found that the distance between the bolt holes is…

view full answer...

Answer 11

As long as you have a Single Lippert Square Torsion axle, the #LC382741 will attach to existing holes, so there won't be any drilling or measurements required to install this.

view full answer...

Answer 12

Thank you for the photo! I was able to pass this along to my contact at Lippert who helped me confirm that the correct lift kit for your axle is the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift #LC382741. Attached is a review video…

view full answer...

Install Instructions Link for Lippert Lift Kit # LC382741

Product Page this Question was Asked From

Continue Researching