Parts Needed To Install EZ Connector Magnetic 7-Way Connector On a 2019 Toyota Tacoma

Question

Question:

Im wanting to purchase an EZ Connector adapters for my toy hauler and 2019 Tacoma. Im able to get the trailer adapter, but ez trailer website states the ez connector doesnt work on a 2019 Tacoma. Is there an option I can us for an ez connector, magnetic 7 way pin that will work on my truck? Thanks

asked by: Kathleen D

0

Expert Reply:

To install a magnetic EZ Connector 7-way on your 2019 Toyota Tacoma first it will depend if your Tacoma already has a 7-way connector.

If your Tacoma does not have a factory 7-way you can use the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # 22117 to install a 7-way. Then instead of using the blade type 7-way connector you can install the EZ Connector Custom Vehicle Wiring Harness w/ Magnetic 7-Way Trailer Connector # 319-S7-06. This will give you the vehicle side connection.

For a Tacoma with the factory tow package you can use the Trailer Connector Adapter # EZ94ZR or hardwire the EZ Connector Magnetic 7-Way Trailer Connector with Watertight Seal # 319-S7-05 into your harness.

Then you will be able to use the EZ Connector Magnetic 7-Way Trailer Connector with 6' Long Cable # 319-S7-07-6 with your Toy Hauler.

expert reply by: Bud M

0

Answer 1

It's possible that the plug or receptacle was made improperly. If you would like to try and shave some plastic off either side to make it work you're welcome to do so but I recommend switching them out so you don't ever have…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 9

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...