Tail Lights, Grommets and Wiring Needed For the Buyers Products Tail Light Mounting Box # 337LB383SL

Question

Question:

I am interested in purchasing the Buyers Products Tail Light Mounting Box - 6inch Oval Hole - 2-1/2inch Round Hole - Black Steel Item # 337LB383SL. Can you please send me a link for the led Lights and rubber surround that I can purchase that fit this box?

asked by: Joseph M

1

Helpful Expert Reply:

For the 6" oval hole in the Buyers Products Tail Light Mounting Box # 337LB383SL you will need the PVC Grommet # a70gb and a Optronics LED Trailer Tail Light # STL72RB. A 3-Wire Pigtail # A45PB is needed for connecting to the light.

The 2" hole on the side will use the 2" Round Grommet # A54GB and Miro-Flex LED Clearance or Side Marker Light # MCL50RB. A 2-Wire Pigtail # A86PB is needed for connecting to this light.

expert reply by: Bud M

1

Answer 1

The overload warning you are seeing indicates that the P3, #90195, detects an excessive current overload condition during operation. This means that there is most likely a short in the brake output wire. The P3 has diagnostic troubleshooting…

view full answer...

Answer 2

According to our FAQ on slipper springs, linked for referenced, the torque specs are as follows: Torque Ratings 1/2 inch Bolts: 45 ft/lbs - 70 ft/lbs 9/16 inch Bolts: 65 ft/lbs - 95 ft/lbs 5/8 inch Bolts: 100 ft/lbs - 120 ft/lbs The Replacement…

view full answer...

Answer 3

If it were my trailer I would fasten the E-Track to the support beams under the trailer, either the side to side one or front to back ones, by going all the way through those support beams. E-Track like #E19148 is zinc-coated steel and since the…

view full answer...

Answer 4

For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 5' Long - Qty 1 #E19148 along with the E-Track Backing Plate - Zinc Plated Steel - 6" Long x 6" Wide #e96RR. This will save…

view full answer...

Answer 5

Congrats on the new SUV. To add a hitch to your 2023 Kia Telluride, I recommend the Curt Trailer Hitch item #C13420. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

In order to remove the hub/drum on your trailer you will want to first remove the spindle nut. Once the spindle nut is removed you are going to want to take a hammer and tap the outer portion of the drum as well as the hub face a few times to break…

view full answer...

Answer 7

You can install suspension enhancement on your 2016 Ram 1500 that has a 6 inch lift like the Air Lift LoadLifter 5000 Air Helper Springs #AL57365 (this is correct kit for your truck) but you do need the correct size spacer like you mentioned. The…

view full answer...

Answer 8

I have a couple options for you as we do not have a box like the Buyers Products Tail Light Mounting Box #337LB383SL with a opening on the side for the Peterson LED Clearance and Side Marker Trailer Light #PE57PR. First would be to drill a 3"…

view full answer...