Optronics Trailer Lights - Tail Lights - STL72RB Review Video

Yes, the Roadmaster spare carrier part #RM-195125 that you referenced will work in the hitch of a 2020 Ford E-450 Class C motorhome.

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

I will be happy to help you find the right LED replacement lights for your horse trailer. Based on the information you have provided the amber LED replacement is #MCL76AB. The red version is #MCL76RB. Another option is to use Peterson lights #M353A…

When our installers replace a trailer hub, there isn't a set torque spec used when tightening the spindle nut. The hub is placed on the spindle, making sure the inner and outer bearings are correctly seated. The spindle nut is then run down until…

The main difference between the Roadmaster Hitch Mounted Spare Tire Carrier item #RM-195125 and item #RM-195225 is the size of tire and increased capacity for flat towing. Item #RM-195125 tops out at 6,000 lbs and is limited to a 16-1/2" tire…

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

Thanks for the picture! I reached out to my contact at Optronics and the lights in your pictures have been discontinued. The closest replacement option currently available is the Low Profile RV Combination Tail Light - Stop, Tail, Turn - 9 Diodes -…

Without knowing what lights you actually have, I can only help with possibilities. I recommend connecting the ground wire to a battery and then touching each of the other wires to the positive terminal to see function. It sounds like you will have…

The part #RVSTL61 is an individual driver side light, if you wanted the passenger side to go with it you'd want the part #RVSTL60. I am confident these lights could be used on your trailer, but they won't be an exact replacement for what you…

For trailer axle u-bolts like the part #APUBR-10 the torque rating to use is between 45 and 75 ft lbs.

The recommended amount of tire clearance to allow for suspension travel on virtually any trailer is 3" from the top of the tire to the bottom of the fender or frame and 1" from the inside of the tire to the frame. If you need to raise the…

Based on your trailer tire size the Fulton Trailer Fenders part #F008585-2 would work very well for you. To see a chart with the fender dimensions see the attached picture.