Customers compare STL175AMFB to these similar products
Products Featured in this Video
Today we're going to be taking a look at the Optronics 00:00:03 Glow light LED mid-ship intermediate side marker and turn signal light. This unit's going to feature a sonically sealed, water-proof design. It features poly-carbonate construction of the lens and the housing that's very strong and durable. That's a full LED system. LED's are going to make great replacements for incandescent lights.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The company that designed the #RM-077-10 (Roadmaster) primarily works with vehicle flat towing which is what they intended this adapter for. The towing capacity of this is 10,000 lbs which refers to the weight of the vehicle being flat towed and the…
view full answer...Since the front of the vehicle will be raised off the ground slightly you wouldn't want to a hitch at the rear of the vehicle since that would angle the rack down and possibly drag the bikes. Best option would be to go with an adapter like the…
view full answer...We do have a dual hitch receiver adapter that will allow you to use your tow dolly while also carrying your bike rack. The only thing you need to know is the amount of rise or drop you'll need, which will allow you to choose the right one. To…
view full answer...We do not carry the Glo-Brite brand of trailer light (and I believe they are no longer in business) but we do have a replacement for the model 1250. My research indicates this amber lens light measures 6-1/2-inches x 2-5/16-inches, like the part…
view full answer...Without knowing what the rating of the circuit breaker you have it would be hard for me to determine what would be the correct replacement just based on the picture you submitted. Your best option would be to find the installation instructions for…
view full answer...The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…
view full answer...The most similar in design and attachment light assembly we have to what you sent in a picture of would be the GloLight LED Side Marker Light and Mid-Ship Turn Signal #STL175AMFB as it has the same lens shape and uses two slots for the…
view full answer...It looks like the red LED on the Bright Way Solar Battery Charger - 7.5 Watt Solar Panel #BRW54FR is actively blinking when it's charging the battery so if it's still on then that would indicate it's sending a charge. It's worth…
view full answer...From the attached image, you have what looks to be an SAE solar plug, a DC connector. This is most likely connected to your battery bank, I suggest you trace the wires. If this does not go through a charge controller, you will need to have one in…
view full answer...Yes, the Camco RV Wastewater Tank Replacement Valve #CAM39513 will have the same bolt pattern as the Valterra RV Sewer Slip Hub #T1005 that you are connecting to. I would still recommend using a Valterra Bladex Waste Valve #T1003VP as it does not…
view full answer...The Custer LED Side Marker or Clearance Trailer Light #CPL120A doesn't require a rubber gasket. The wiring and LED's are sealed completely and there is no need for a gasket. If you are running the wiring into the wall be sure to use silicone…
view full answer...You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…
view full answer...