Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
Question:
l’m replacing the hubs on my loadrite boat trailer. The hubs I currently have are marked 46210 and 46845. I want to replace them with vortex hubs. From what I can tell it would be 81022 hubs and F46246 rotors. Is this correct? Do you sell complete bearing/seal vortex hubs with integral rotors?
asked by: Denny J
Expert Reply:
I did some looking and found that the 46210 and 46845 hubs you currently have use the same # L68149 inner bearing and # L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them, unfortunately.
With that being said, the Kodiak 10" Hub-and-Rotor Assembly # KHR10D paired with the bearing kit # BK2-100 will definitely attach to your spindle. From there, the Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated # BB1980A will allow for easy greasing.
Depending on how the rest of the components, like the calipers and caliper brackets, are looking, it may be better to replace the whole system. The Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs # K2HR35D will still need the bearings and Bearing Buddy system, but will be a more complete kit.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Replacement Left-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black
- Search Results: 215/75r14
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Search Results: galvanized e track
- Search Results: stl69rcb
- Search Results: tde 46845
- Search Results: 82084
- Shop: RV Exterior Lighting
- Search Results: battery cut off switch
- Search Results: water heater anode
- Video: Kodiak Disc Brake Kit Installation K2R35D
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: Bearing Kit for Load Rite Boat Trailer with TDE Hub 46845
- Video: Titan Premier Disc Brake Kit Installation
- Video: Fastway Flip Automatic Fold-Up Jack Foot Review FA88-00-6500
- Video: Review of Fastway Trailer Jack - Camper Jacks - FA88-00-6500
- Shop: Windshield Covers
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Video: Kodiak Hydraulic Brake Line Kit Review
- Q&A: Brake Kit and Actuator Needed for a Tandem Axle Boat Trailer
- Shop: Trailer Wiring
- Q&A: Are there Stainless Steel Wheel Studs for Trailers
- Shop: Trailer Hitch
- Q&A: Replacement Brake Actuator for Tie Down Engineering LP7000