Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245

Question:

looking for replacement hub and bearing for # IDE 46245 min-thk 850IN

asked by: MATT

Expert Reply:

I believe you meant a TDE 46245, is that correct?

If that's the case, you've got a 3500 lb axle which uses a 10 inch hub/rotor with a 5 on 4-1/2 wheel bolt pattern. You'll want to use the Kodiak # KHR10D hub/rotor as a replacement. The hub has a 21.6mm or .850 inch minimum thickness. The hub/rotor is Dacromet plated which provides excellent corrosion resistance that is ideal for marine use.

For the replacement bearing kit, use # BK2-100 which includes the L44649 outer bearing, the L68149 inner bearing, the L44610 outer race, the L68111 inner race and the 10-19 grease seal with a 1.719 inner and a 2.565 inch outer diameter. The tang washer and cotter pin are also included.

expert reply by: Mike L