Replacement Bolt-On Disc Brake Actuator for Tie Down 70E
Question:
Im looking to replace my Tie Down 70E disc actuator. Do you offer a replacement that would allow me to use the same holes on the trailer for mounting? It uses three mounting bolts, see below pic. I would like to avoid drilling new holes and cutting the trailer if it all possible. Thanks
asked by: Mike Y
Expert Reply:
There is a replacement that I recommend for the Tie Down 70E disc brake actuator, though you will want to verify that your mounting bolt holes are 3 inches apart on center and your tongue is a 3 inch channel.
If they are I recommend the Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20.
This actuator has a 7,500 lb capacity, couples to a 2 inch hitch ball, and is designed for use with disc brakes like you need. I have added a link to a video review for you to check out as well.
Product Page this Question was Asked From
Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Article: Most Popular Wheel Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Dexter Zinc-Plated Brake Actuator - Disc - Multi-Fit Ball - Bolt On - 7,000 lbs
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and Stainless Steel - 3,500 lbs
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Q&A: Tie Down Model 70 Surge Brake Actuator Replacement Recommendation
- Q&A: Replacement Trailer Leaf Spring for 2,700 lb Axle 26-1/4 inch In Length
- Video: Review of Dexter Axle Brake Actuator - 099-175-20
- Video: DeeMaxx Disc Brake Kit Review
- Q&A: What Spindle Will Work for Trailer Hub Assembly with L68149 Inner and L44649 Outer Bearings
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Replaced Leaf Springs On Tandem Axle Boat Trailer And The Rear Springs Are Tilting Rear Axle Forward
- Search Results: tie down brake actuator
- Video: Review of Dexter Brake Actuator - Surge Brake Actuator - DX43FR
- Shop: Trailer Wiring
- Video: Neighbor Interaction with the DeeMaxx Disc Brake Kit
- Search Results: bh~3mfs~3~5
- Search Results: bh~3mfs~1~5
- Search Results: bh~3mfs~7
- Search Results: bh~x~3fif
- Search Results: guide post lights
- Search Results: 023~463~00
- Video: Kodiak Trailer Brakes 20TA-BLKIT Review
- Video: Review of Dexter Axle Brake Actuator - Surge Brake Actuator - DX63FR