Air Bag Suspension Kit for 2006 Ford F-350 and Torklift Camper Tie Downs

Question

Question:

I have 2006 F350 crew cab 4WD shortbed dually. Gonna be using a truck camper and hauling my boat I have a factory tow package with the hollow square tube across the back the receiver is 21/2 inch with a reduction sleeve to 2 inch , I want the the part numbers for a limited drilling airbag suspension kit no more than 400.00$ I will fill the air so want the t fitting part number for equal filling as well. Also Im ordering the following parts pls verify if all are compatible with my rig. Torklift TLF2007, TLF3004, would like hitch extension TLE1636 but I dont think its for 2006 F350 , so Curt Hitch is my second choice part #C45048 if Torklift doesnt have. thank you vey much for verifying these parts for me.

asked by: Pete V

0

Expert Reply:

The best air bag kit for your 2006 Ford F-350 that fits your budget is the Firestone Ride Rite kit part # F2400 which I attached an install video on for you to check out as well. The Torklift tie downs part number # TLF2007 and # TLF3004 are both a fit as well.

For a hitch extender you'd need something like the part # RP45292 as the # TLE1636 can only fit Torklift hitches.

expert reply by: Jameson C

0

Answer 1

Going out further than the overhang of the camper wouldn't be helpful and would only potentially add more leverage on the truck's hitch. Since your 2020 Ford Superduty has a camper than extends out past the rear of the truck 36 inches the…

view full answer...

Answer 2

Four feet of clearance is quite a bit, but there is one configuration that I found that might work. Since you have a 2020 Ford F-350 Super Duty, you probably have a 3" receiver. With this, you can add the TorkLift Cannon Hitch Extension, part…

view full answer...

Answer 3

To determine which hitch extension you will need for pulling your trailer behind your 2022 Ford F-350 with the factory 3" receiver while you are carrying a truck bed camper you will need to measure the distance needed for the amount the camper…

view full answer...

Answer 4

The 3" hitches Ford is using are throwing everyone for a bit of a loop. With that being said, I do have a couple options for you to check out. First will be the TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch #TLE1636.…

view full answer...

Answer 5

We do offer hitch extensions for the factory 3" trailer hitch receiver on your 2017 Ford F-350 Super Duty, but there is not one that is 24" long. The shortest extension available is the TorkLift Cannon Hitch Extension - 3" Ford Super…

view full answer...

Answer 6

Yes, you can use Reese Hitch Box Extension and Reducer #RP45292 in your 2012 Ram's 2-1/2-inch hitch to provide you with the additional clearance you need to tow your motorcycle trailer. This item is intended for just such an application in a…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...