TorkLift Hitch Adapters - Hitch Extender - TLE1536 Review Video

The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you…

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used…

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system…

When it comes to higher towing capacities and hitch extensions the Torklift extensions are the only way to go like with the part #TLE1536. So to use this with your 2021 Ram 3500 you would need the Torklift hitch part #TLD1111-30 which fits underneath…

Thanks for the pictures! My main concern in recommending a shorter extension, like the 36" TorkLift SuperTruss item #TLE1536, is clearance when making turns. The 36" would clear your camper and allow you to install your tow bar without…

The Torklift SuperHitch Magnum #TLF1002-30 weighs 140-lbs; I'm not sure how much the factory hitch weighs, but I'm guessing that it's likely around 40-50lbs. If you're having issues with sag on your 2000 Ford F-250 then you might want…

The hitch opening location for the Torklift Hitch part #TLF1002-30 that you referenced will be very close to where you current hitch opening is. If the 28 extension part #TLE1528 would work well based on your current measurements it would be a great…

The TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers #TLE1536 that you referenced weighs 70 lbs.

On your 2017 Ford Escape you can best remove the hardware from your frame by basically reverse installing the hitch. This would include using the fish wire to keep track of your bolts to ensure they don't remain in the frame. If you were to lose…

Yes, the #TLR3503 are the correct rear tie downs for your 2016 Ford F-350 with the 6-3/4 foot bed, cab length running boards, and your recently installed TorkLift 20K SuperHitch Original #TLF1002. For the front tie downs, the correct part number is…

First you will need to select either the TorkLift StableLoad Lower #TLA7311S or TorkLift StableLoad Upper #TLA7200 depending on the type of leaf spring you have. The StableLoad Lower is designed to work on leaf springs where the overload spring is…

The TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" item #TLF1002-30 you referenced does fit your 2007 Ford F-350 Super Duty. It can definitely be part of the solution because that hitch offers you…