Review of TorkLift Hitch Adapters - Ford Super Duty Hitch Extender - TLE1636 Video

The Torklift Cannon Hitch Extension #TLE1636 that you referenced weighs 73 lbs.

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…

Going out further than the overhang of the camper wouldn't be helpful and would only potentially add more leverage on the truck's hitch. Since your 2020 Ford Superduty has a camper than extends out past the rear of the truck 36 inches the…

I am a bit confused, because I was under the impression that Ford didn't begin offering the 3 inch hitch until the 2017 model year. As long as the hitch on your 2016 Ford truck is the 3 inch factory receiver, the Torklift #TLE1636 will be…

To determine which hitch extension you will need for pulling your trailer behind your 2022 Ford F-350 with the factory 3" receiver while you are carrying a truck bed camper you will need to measure the distance needed for the amount the camper…

for your 2013 Ford F-150 the TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers #TLF1005H will partner with the factory hitch on your truck. It is designed for 6-1/2 foot bed trucks which is what it…

Four feet of clearance is quite a bit, but there is one configuration that I found that might work. Since you have a 2020 Ford F-350 Super Duty, you probably have a 3" receiver. With this, you can add the TorkLift Cannon Hitch Extension, part…

In the 3 inch hitch version the shortest version of the Cannon Ford Hitch Extension is the part #TLE1636 which is 36 inches long.

We do offer hitch extensions for the factory 3" trailer hitch receiver on your 2017 Ford F-350 Super Duty, but there is not one that is 24" long. The shortest extension available is the TorkLift Cannon Hitch Extension - 3" Ford Super…

For a 48" hitch extension that fits a 3" receiver you're going to want the TorkLift Cannon Hitch Extension item #TLE1648. This hitch extender is specially designed to work with Ford's 3" factory trailer hitch. This is the only…

The 3" hitches Ford is using are throwing everyone for a bit of a loop. With that being said, I do have a couple options for you to check out. First will be the TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch #TLE1636.…

So there are differing opinions even here at etrailer as to what is the best product for a customer so you will see some variances in what we recommend. Some of that is due to well researched info and experience and sometimes it might be less than…