Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
(128 reviews)
Price: $48.78
In Stock
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
Item # APS1
Our Price: $48.78
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (128)
- Q & A (0)
- Photos
Redline Trailer Suspension Parts - APS1
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- Redline
Kit includes 1-1/2" tall front hangers, 7/8" tall rear hangers, 3-1/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.
Features:
- Attaches 2 leaf springs (sold separately) to your trailer frame
- Use table below to determine hanger location based on type of leaf springs
- Achieves 4-1/4" or 4-1/2" clearance between trailer frame and axle, depending on axle size
- Includes:
- (2) 1-1/2" Tall front hangers (115917)
- (2) 7/8" Tall rear hangers with steel bushings (30-20)
- (4) 3-1/8" Long shackle straps (115208)
- (6) 3" Long x 9/16" diameter shackle bolts (9163B)
- (6) 9/16" Diameter locknuts (916DLN)
- Designed for use on trailers with single, 2,000-lb to 7,000-lb axles
- Does not include components for mounting axle to springs
| Leaf Springs | A - Distance Between Hangers | B - Distance Between Center of Axle and Trailer Frame | Axle Diameter |
|---|---|---|---|
| SP-169275 (1020) | 20" | 4-1/2" | 1-3/4" (typical 2,000-lb trailer axle) |
| SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) | 24-7/8" | 4-1/4" | 2-3/8" (typical 3,500-lb trailer axle) |
Note: The above table provides an indication of where the included hangers can be mounted on your trailer. The distance between the hangers may vary depending on your specific application. Be sure to verify proper positioning before welding.
APS1 Single Axle Hanger Kit - 1.75" Double Eye Springs - 2,000 lbs to 7,000 lbs
Customer Reviews
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear - APS1
Average Customer Rating: 4.9 out of 5 stars (128 Customer Reviews)
Kit includes 1-1/2" tall front hangers, 7/8" tall rear hangers, 3-1/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.by: TC12/11/2020
This is a great kit! It included everything we needed to replace the old, worn-out brackets on our 6'x10' trailer. The directions were helpful and the brackets and hardware are nice and solid. We've had zero issues with the leaf springs (purchased on etrailer.com, also) or the brackets. Would definitely recommend!
by: Joseph03/13/2020
Excellent, had everything I needed and more for my trailer. Everything fit well!
by: Thomas 10/25/2023
Everything fit perfectly
by: Mark08/25/2018
Quality seems good and I REALLY appreciate the opportunity to acquire these items as a complete set for my application
by: Tim01/05/2017
I ordered replacement leaf springs for my trailer using the instructions provided by etrailer. The correct items were shipped and they fit perfectly! The mounting hardware was exactly what was needed. No extra parts were needed as in run to the local hardware store! The springs went in with no problems.
I would absolutely buy from etrailer again as their customer service was excellent as was the products.
by: Kirby L11/13/2016
I bought a axle, springs wheels, hubs etc. to build a utility trailer, I inadvertently had ordered incompatible hubs for the selected axle the person filling the order noticed this and contacted customer service to alert them of the issue who then called me to correct the problem. This saved me the time and expense of returning the part and delaying the project. great service, attentive, knowledgeable employees and great products.
Thanks E trailer.
by: Doug 07/01/2023
Works as good as expected
by: James G02/12/2016
Fast shipping. Great customer service. Also bought left springs to go with. Worked great on my small boat trailer.
James G.
2/11/2017
1year and still doing great. Thanks
by: Joe W10/16/2015
I haven't installed this yet but it is just what I needed and expected. My old boat trailer need new everything so this does it for me, just some time to weld it on.
Thanks,
Joe
Joe W.
10/15/2016
These spring hangers worked great. My boat is back on the road!
by: David02/13/2018
Sometimes on older trailers the leaf spring bushings will wear out and the mounting bolts will get wear grooves in them. Its cheap to replace everything play it safe.
Everything fit perfectly.
by: Michael 06/30/2023
Parts are very good quality...delivery was fast ...price was very fair. Thank you
by: Lavern A03/27/2017
I have purchased several items from etrailer and have always been very satisfied with there parts and there service. I have never had the pleasure of talking with any of there reps,because they do such a great job of describing their parts with videos and knowledgeable people it makes the job easy. When you live in a small town you can't just go down town and buy a new set of spring hangers or a new spring, but with the push of a button you can usually find what you need and it is priced fairly.I am a very satisfied customer. keep up the goog work etrailor
by: Phil11/29/2017
The parts I thoug call with hardware kit was thing didn't need we're ther the parts I thoug came with kit not ther had buy eels We r u bolts were not in kit the main thing I thoug wood be in kit thanks
Laura E.
12/1/2017
Phil, thanks for your business and your review. Since the required U-bolt lengths and diameters vary from axle to axle, the mounting components are sold separately. The U-bolt kits may be found at this link:
by: Jason M06/02/2015
Great prices, fast shipping, and great customer communication! Just received my order, and getting ready for install. Would definitely order from etrailer again!
Jason M.
6/18/2016
Thanks for following up. I used your product on a motorcycle trailer I was building for a trip I made last year. Im extremely impressed with the quality of your product, and also the affordable pricing! I had two Harleys on the trailer with a total worth of about $65,000 and we hauled them from Nevada to Ohio and back with zero issues and your product performed flawlessly. Thanks so much again
by: Sharon11/02/2019
After purchasing an order of springs, shackle kit, U-bolts, bearing kit and a new Pro jack for a trailer repair I discovered a week delay in shipping due to one of the items on back order. (Email the day after I ordered informing me of the delay) A call to Angie K. On that Sunday!!!! And she had an in stock item to replace it and had my order on its way Monday morning , Thank You Angie everything sent was what I ordered and correct. Communication was great and they did what they said they would, Good prices and free shipping on my orderThanks again
by: Van V07/11/2015
I have not welded them unto the trailer as yet, but the parts seem to be of high quality.
Van V.
7/10/2016
Everything seems to be working fine. I have had no problems with the parts.
by: george08/25/2013
Items were shipped quickly. All parts were clean ready to weld in place. While my project may have a long way to go, the installation of the springs was quick and easy with springs and the mounting kit from etrailer.
by: Paul C.11/20/2013
Wow, the shackle plates were long, but everything is quality materials. The nuts are locking and bolts are hard. Nuts threaded on without and problems. took a bit till I figured out the after shackle hanger where it said Up was to be against frame before welding. Welded on with easy,no penetration problem what so ever
by: Alex03/25/2016
I haved purchased numerous products from etrailer, no disappointments ever
This company delivers at a 5 star rating
Alex
3/25/2017
Its been a year and the parts are working great
by: Kenneth05/10/2020
All the parts have great quality. Haven't gotten to building the trailer as yet!
Kenneth
5/11/2021
They are working perfectly!
by: Raymond J.05/07/2015
Got this & A Tandem Axle Set. Was very, Very Happy with my order and was delivered very, very fast too. The wonderful Lady who I ordered it from, Was a, Supper nice person. I Loved talking with her. She was so carring and helpful. She is a very Big Asset to your company. Thank you All so much. Will now be ordering ALL my Trailer parts from you ONLY. Again, Thank You So Much.
by: Andrew B04/05/2014
Parts are exceptional quality. Shipping very fast. I will continue to choose etrailer.com for my purchases, as the quality and price are far better than locally available.
by: Steve06/09/2015
I used these to install new springs on my trailer. For the price, it was easier than ordering all the parts separate. They are not galvanized so I painted the parts. Parts all came very quickly.
by: Mike R07/22/2016
I used these hangers to weld up a new adjustable spring & axle carrier with new springs on a small boat trailer. Great quality, low price and fast shipping. Bravo e Trailer.
by: Tim L.09/24/2015
Unbelievable service. Order confirmation within 20 minutes. shipping info, with tracking number when shipped. Used standard shipping and still got it in a few days. Exactly what I ordered. Customer service second to none. Materials were great also.
25
128
Show More Reviews
See what our Experts say about this Redline Trailer Suspension Parts
- Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a TrailerThe Trailer Leaf Spring, 2250 lbs. 6 Leaf, item # e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to center dimension as the original mounting brackets. These springs are designed for a 4,500 pound axle. If you are building a new trailer you will need to determine the weight capacity of the axle you will be using and order springs and hangers...
view full answer... - Leaf Springs, Hanger Kit, and U-Bolts for a 2 Inch Square Trailer AxleSince you do not know the capacity of the trailer axle then you can't go by the capacity of the springs. If the axle is rated for 2,000 pounds and the springs for a 3,500 pound axle then you would still be limited to 2,000 pounds. If you have the inner and outer bearing numbers then that will help to determine what the likely axle capacity is. Since you want to replace the hangers as well as the springs then it doesn't matter which springs you choose. If the axle does end up having a...
view full answer...
- Are Bushings Included with Redline 6-Leaf Double-Eye Spring e64SRWith the Redline 6-Leaf Double-Eye Spring # e64SR for 7,000-lb Trailer Axles the correct nylon bushings to use are already included in with the spring. If you need shackle bolts to install the springs you can use either dry bolt # 166081 or wet (greaseable) bolt # 126B2. For a single axle trailer you can use hanger kit # APS1. For a u-bolt kit to mount your 3-inch axle to your springs you can use part # APUBR-8.
view full answer... - Should the Trailer Suspension Rear Hanger be Closer or Farther From the Axle than Rear Spring EyeThe rear hanger should be slightly closer to the axle (forward) of the trailer. If you look at the drawing on the product page for Single-Axle Trailer Hanger Kit for Double-Eye Springs, # APS1, you will see the rear hanger is more forward than the center of the rear eye of the spring. The shackle, then, is at a slight angle with the top more forward than the bottom. I have included a link to our double-eye trailer suspension FAQ article that contains a lot of good information on trailer...
view full answer... - 3,500 lb Axle, Leaf Spring, Wheel and Tire, Hanger Kit and U-Bolt Kit Recommendation for a TrailerThe Trailer Axle w/ Electric Brakes # e43SR that you referenced is a 3,500 lb axle so you will need to use springs with the same capacity. For that I would recommend the 3-Leaf Double-Eye Spring # e57SR that you also referenced. For a single axle hanger kit you would want the Single-Axle Trailer Hanger Kit # APS1. For a wheel and tire combo that you could run all around your trailer you could get the Karrier ST205/75R15 Radial Trailer Tire with 15" Galvanized Wheel # AM32397. This would...
view full answer... - Parts Needed to Rebuild Suspension of 4 x 9-Foot Utility TrailerThe 2200-lb-rated axle/hub kit # 20440I-EZ-60 should be fine for a 4 x 9 utility trailer. This kit includes 4-on-4 hubs that work with trailer wheels from 8- to 12-inches diameter, like # AM30040, but note these wheels/tires are rated for 745-lbs each so two of them can handle 1490-lbs, not 2200-lbs as the axle can. Keep this in mind as you load the trailer up; the weakest link determines overall capacity. Your trailer frame may be rated for more or less weight than these other parts. The...
view full answer... - Trailer Suspension Hanger Spacing When Using Spring e46SR on 6,000 Pound AxlesThe hanger spacing depends on the number of axles and some other factors including the hanger kit that is used. On a single axle trailer using kit # APS1 the center to center distance from the front to rear hanger is 24-7/8 inches. On a tandem axle set up the center to center distance from the front to center hanger and from the center to rear hanger is 29-1/2 inches. On a triple axle set up the distance from the front to the second hanger is 29-1/2 inches, from the second to third hangers...
view full answer... - Compatibility of Replacement Trailer Suspension ComponentsThe parts you referenced are compatible with each other. Hanger Kit # APS1 works with 1-3/4-inch wide leaf springs like # SP-210275. U-Bolt kit # APUBR-1 fits your 2-3/8-inch axle as does Spring Seat # TRSS238. For reference I linked you to an article on trailer suspensions and to our main page for all trailer suspension components.
view full answer... - Comparing the Single-Axle Trailer Hanger Kits for Double-Eye Springs APS1, APS2, and APS3When choosing between the Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS1, part # APS2, and part # APS3 it will be best to use the one that has measurements that most closely resemble what is already on your trailer. For example, if your rear leaf spring hangers are 7/8" tall or shorter than you would want to use part # APS1 but if they are taller then this you would want to use part # APS2 or part # APS3. The only difference between the two latter kits is that part #...
view full answer... - Can a Rear Hanger that is Wider than the Trailer Frame be Still be UsedThe reason that the hanger is wider is most likely because double-eye springs are 1-3/4 inches wide. But as long as the hangers you are using are welded to the bottom of the frame as much as they possibly can be it will be fine. Welding should be performed by a qualified professional welder.
view full answer... - Leaf Spring Suspension Recommendation for 42 x 48 inch TrailerBasically you would need to replace the rear hanger with a double eye style hanger, use a shackle strap and then get the appropriate leaf spring. The lightest capacity spring we have is the part # e84SR which you referenced. For the price the best option is to just replace all of the hangers and use the kit part # APS1 which comes with everything you'd need and would work great.
view full answer... - Will Different Hanger Spacing For Single-Axle Trailer With Double-Eye Springs Be A ProblemThe Single-Axle Trailer Hanger Kit, Item # APS1, has recommended measurements that are meant to be guides. Actual measurements can vary depending on your situation. You may impact your tongue weight capacity with different location for the installation. If you can get your springs to fit properly then you should be fine. I am attaching an article on trailer suspensions to assist you with your project.
view full answer... - Hanger Spacing to Use with a 24-1/4 inch Leaf Spring Light PR4B on Single AxleYou bring up an excellent question. The distance you actually want to use with the 25-1/8 inch spring part # e54SR between the hangers of the # APS1 is 24-7/8 inches so that it allows the shackle to angle the proper direction.
view full answer... - Width of Hangers Included With Single-Axle Trailer Hanger Kit for Double-Eye SpringsThe larger hanger that comes with the # APS1 is 2-5/16" wide on the outside and 1-7/8" on the inside. The smaller hanger is 1-13/16" on the outside and 1-3/8" on the inside. These are designed to work with your standard 1-3/4" wide double-eye leaf spring. I have attached the full dimensions below.
view full answer...
- What are the Proper Components Needed to Install the Leaf springs On a TrailerBuilding a single axle trailer you will need the following items to install leaf springs. I have listed the part numbers for the PR626 Springs next to the items needed. 2 Springs - # e27SR 2 Front Hangers - # 115917, 1-1/2 inch tall or # 28-5, 3-1/4 inches tall 2 Rear Hangers - # 30-20, with 1-1/2 inch or # 93003-3x, with 3-1/4 inch 4 Shackle Straps - # TRSL313 6 Shackle Bolts and Nuts - # 166081 These components are available in the following Kits. Single Axle Trailer Hanger Kit 1-1/2...
view full answer...
- Recommended Shackle Straps or Hanger Kit for Single Axle TrailerWe have some kits like the Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear # APS1 and the Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear # APS4. You are correct that that bolting to your hangers on both ends is not correct, however the size of the shackle strap needed is determined based on your hanger length as you can see in these kits. So, the Shackle Strap - 3-1/8" Long # TRSL313 may or may not be a good fit based...
view full answer...
- How to Correct Trailer Whose Spring Hangers Do Not Line Up With Spring SeatsYou will need to have the spring seats removed to have them or new spring seats welded to your axle at the correct locations to match your trailer's hanger spacing. For a 3-inch round axle rated between 5200- and 7200-lbs use part # TRSS300; for a 2-3/8-inch diameter 3500-lb axle use part # TRSS238; for a 1-3/4-inch diameter 2000-lb round axle use part # TRSS175. If you cannot re-position the spring seats to match the hanger spacing then you can have a qualified welder install new material...
view full answer... - Mounting Hardware Needed To Install 3,500LB Axle & Double Eye Leaf Springs on a Torsion Axle TrailerHere is a list of suspension kits we have that contain the hangers, shackle straps and mounting bolts for the leaf springs. Single-Axle Trailer Hanger Kit 1-1/2" Front, 1-1/4" Rear # APS2 Single-Axle Trailer Hanger Kit 3-1/4" Front, 7/8" Rear # APS5 Single-Axle Trailer Hanger Kit 1-1/2" Front, 7/8" Rear # APS1 Here are kits for just the spring hangers. Single-Axle Trailer Hanger Kit 1-1/2" Front, 1-1/4" Rear # APS3 Single-Axle Trailer Hanger Kit 3-1/4" Front, 1-1/4" Rear # APS4 We...
view full answer... - Overall Dimensions of the Hangers in Single-Axle Trailer Hanger Kit APS1I went out to the warehouse and pulled hanger kit # APS1 to measure the hangers for you. The larger hangers measure 3 inches long, 2-5/16 inches wide, and 2-1/8 inches tall overall. The smaller hangers are 2-1/8 inches long, 1-13/16 inches wide, and 1-1/2 inches tall overall. On the smaller hanger the shackle straps attach to the outsides of the hangers.
view full answer... - What is the Correct Distance Between the Spring Hangers When Using a e66SR Leaf SpringThe distance of 25-3/4 inches would be the correct distance to have between the spring hangers. You have to consider that as the the leaf spring compresses from the weight of the trailer it will flatten out and the overall length of the spring will increase so that the shackle will face the right direction.
view full answer... - Recommended Leaf Springs and Hangers for a Custom Trailer w/ a 2,000 lbs AxleWelcome back! The correct U-Bolt kit for mounting your 2,000 lbs trailer axle is item # APUBR-10. The right set of leaf springs for your trailer is typically determined by capacity and where your spring hangers are mounted. Since you are customizing your trailer you're not bound by this limitation. Since your trailer's axles going to max out at 2,000 lbs, I recommend the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles item # SP-169275. These 3 leaf springs are 20-3/8" long. They will...
view full answer... - Recommended Trailer Components Between Frame And 2 Inch Square Axle Of Small TrailerFor your trailer with GVWR of 780 lbs, the best option we have for your leaf springs is the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long # e84SR you mentioned but they are definitely overkill. To mount your springs to your frame, I recommend the Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear # APS1 which will need to be welded in place. To mount your 2 inch square axle, I recommend the CE Smith U-Bolt Kit for Mounting 2" Square Trailer...
view full answer... - Do Shackle Straps in Trailer Hanger Kit # APS1 Bolt to the Inside or Outside of HangerThe shackle straps included in the # APS1 trailer hanger kit will bolt to the outside of the rear hangers, which measure 9/16 of an inch from the top to the center of the bolt hole. I am including some links to videos and FAQs with information that should be helpful as you go through the suspension kit installation.
view full answer... - Leaf Spring Hanger Options for 8x8 Tilt-Bed TrailerFor the springs, I'd recommend the # e84SR spring, which is designed for 2K axles and measures 20-3/8 inches from eye center to eye center. If you need a U-bolt kit for this axle, # APUBR-10 will work well. The hanger kit you use will depend on how much space you want between the axle and the trailer frame. Hanger kit # APS1 provides between 4-1/4 to 4-1/2 inches of clearance. # APS3 would give between 4 and 4-1/2 inches of clearance. # APS4 is 5 to 5-1/2 inches and # APS5 is between...
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Expert Research:
Sarah L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Lindsey S
Updated by:
Alexander C
Video by:
Kathleen M
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mark
8/25/2019
holding up great.