How Much Height To The Bunk Boards Does the Boat Trailer Deluxe Roller Bunks Add
Question:
Im planning on installing the Dutton rollers 2, 4 foot rollers onto my 8-foot wood bunk. However, it looks like itll raise the boat close to 3 inches. Boat would then sit higher than the wheel wells and would seem like it could cause a problem securing the bow of the boat as the eye hook would be above the bow roller. Any suggestions?
asked by: Seth S
Expert Reply:
The Boat Trailer Deluxe Roller Bunks like part # DL21740 will add about 2-1/2" from the height of the bunk board. This should really not pose many issues but you may be able to adjust the bolster brackets or swap them out for a lower profile option.
I have attached a list below with some of our replacement bolster bracket options.
Product Page this Question was Asked From
Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by Dutton-Lainson
- Video: Dutton-Lainson Roller Bunks for Boat Trailers Review
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 1,200 lbs
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21740 Review
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21754 Review
- Video: Timbren Silent Ride Suspension Review
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: Timbren Trailer Axles - Rubber Spring Suspension - A35RS545E Review
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Article: Trailer Tire Sizing
- Q&A: Recommendation For Converting Boat Lift Bunks To Roller Bunks
- Q&A: How to Determine Correct Axle Position for Fabricated Ice House Trailer
- Q&A: Can a 145R12 Tire Replace a 4.80x12 Bias Trailer Tire Size
- Q&A: Can Carpeted Bunks be Replaced by Roller Bunks on Boat Trailer?
- Q&A: How to Mount the Fulton Plastic Trailer Fenders
- Q&A: Can I Convert Regular Bunks To Roller Bunks
- Q&A: Adding Roller Bunks to a Boat Trailer with 8 Foot Carpeted Bunks
- Search Results: torsion axels
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Search Results: 44649
- Article: How to Choose the Right Trailer Hitch Class