Customers compare TSR14K35T01 to these similar products
Products Featured in this Video
Today we're going to be taking a look at the Timbren line of silent ride suspension systems. Now, these systems have been designed to work for trailers with capacities anywhere from 2000 pounds all the way up to 14,000.Now, the silent ride system from Timbren is really one of the best upgrades you can make to a trailer suspension. This is going to give you excellent handling out of your trailer.… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
For a 6" or 8" axle, I'm not seeing anything for that unfortunately - however, for your 14K livestock trailer, I recommend checking out the Timbren Silent Ride Suspension for Tandem Axle Trailers #TSR14K35T01. This system will work…
view full answer...The maximum deflection or compression/movement of the Timbren Silent Ride Suspension for Tandem Axle Trailers #TSR14K35T01 is 1-5/8 to 1-7/8 inches. That's the amount it will move from zero load to full compression.
view full answer...The Timbren Silent Ride Suspension for Tandem Axles, #TSR14KT01, was designed to eliminate the problems that traditional leaf spring trailer suspension encounter on travel and 5th wheel trailers. (The Silent Ride system will bolt right up to the…
view full answer...The review you mentioned does have a customer of our having to install a 4 inch sub frame spacer to install the Timbren #TSR14K35T01 like you mentioned to accomplish the same ride height as their previous straight axle setup. But worth nothing is…
view full answer...Correct, the Timbren Silent Ride Suspension for Tandem Axle Trailers part #TSR14KT01 is designed for 7,000 lb axles as the total capacity is 14,000 lbs. It is also designed for a 33" axle spread. If you have a 35" axle spread you'll…
view full answer...The side of the shackles with two holes needs to be mounted on the bottom of the Lippert Center Point item #LC1565391. The side with the single hole connects to your leaf springs. I have linked an installation video below along with a couple of…
view full answer...Yes, the Roadmaster Comfort Ride system part #RM-2460-2570 would fit your 2019 Fuel 335 Toy Hauler. It would do a great job improving the ride quality.
view full answer...I can help you determine the right replacement 6,000 lb double-eye leaf springs for your trailer, though we don't have any way of knowing what specific ones that trailer needs and I couldn't find a reference to the part you mentioned.…
view full answer...On the inboard side of the Timbren Silent Ride Suspension #TSR7000T05 there are two flanges that have two slotted bolt holes on them. That is where the crossmember attaches. Each axle would be rated for 7k so with this you would have 14k of axle…
view full answer...Yes, you can. I checked with Curt and the Sidewinder Wedge for Curt CrossWing 5th Wheel Trailer Hitch item #C85DR is the correct wedge kit for a Curt Turning Point.
view full answer...From the mounting surface on the frame of your trailer down to the axle center on the Timbren Silent Ride part #TSR3500S06 measures 5-1/4 inches. You would need to compare that to your current setup to determine if that would change the ground…
view full answer...If your existing leaf springs originally measured 25-3/4 inches, it is highly likely that you can put 26 inch long leaf springs, like #e27SR, on your trailer without needing to change the equalizers or move your spring hangers. If the existing…
view full answer...