Parts Needed To Rebuild Hub On 1985 Shoreline Boat Trailer
Question:
I have a 1985 shoreline boat trailer and have had a lot of trouble finding a complete replacement hub if it exists. It is a 13inch wheel, 5 bolt x 4.5 inch hub. The spindle diameter is 1.25 1inch where the castle nut screws on the end. The bearings inside are both LM67048. The washers were missing, so I also need the correct ones. Any clues? I see there are kits out there, but I prefer to just replace the whole unit.
asked by: Jon F
Expert Reply:
I have a replacement bearing option for you, but at this time we do not offer a replacement hub that uses # LM67048 as the inner and outer bearing.
You could replace the bearings with # LM67048, and replace the grease seal on each hub as well given there is not severe damage to the hub itself.
To determine the correct replacement grease seal you will need to use digital calipers like # PTW80157 to precisely measure the spindle where the grease seal goes, and the inside of the hub where the grease seal is pressed in.
With these two measurements I will be able to confirm the correct replacement seal for you.
Lastly for a replacement washer you can use the # SW1000 since your spindle has a diameter of 1" where the castle nut goes.
(click to enlarge)
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Review of TecNiq Boat Lights - Red And Green LED Deck Mount Navigation Boat Light - TN52ZR
- Shop: LED Boat Navigation Light - Deck Mount - Green and Red - Stainless Steel Cover
- Q&A: How To Fix the Cotter Pin Not Catching the Ears On Spindle Nut For a Boat Trailer
- Video: Review of TruRyde Washer For 1 Inch Spindle - SW1000
- Shop: Washer For 1" Spindle
- Shop: Spindle Nut, 1-1/2"
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13210 Review
- Q&A: Correct Replacement Leaf Springs for Malone Microsport Trailer
- Q&A: Which Bearings Can Be Used to Replace Bearings on Malone MicroSport Trailer
- Q&A: How to Install the CE Smith Post-Style Guide-Ons on a Malone MicroSport Trailer
- Q&A: Converting Malone MicroSport Trailer Crossbar Conversion to Low Bed Style
- Q&A: Adding Red and Green Navigation Lights To a Kayak
- Video: etrailer Trailer Bearings Races Seals Caps - Bearings - L44643 Review
- Shop: Replacement Trailer Hub Bearing - L44643
- Video: CE Smith Boat Trailer Parts CE27656A Review
- Video: CE Smith Boat Trailer Parts - Winch Stand - CE31013G Review
- Shop: CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Video: Choosing the Right Trailer Wiring
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: 68149
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: dust cap
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25580
on Trailer Bearings Races Seals Caps
