Adding Red and Green Navigation Lights To a Kayak

Question

Question:

Can the TN62FR be used as a navigation light on a kayak? Also, what gauge wire pigtail comes on that light?

asked by: Thom

1

Helpful Expert Reply:

The Green LED Boat Accent Light # TN62FR uses 18 gauge wire and you could pair this with the Red LED Boat Accent Light # TN82FR and 2 Covers # TN45FR on your Kayak. We also have the LED Boat Navigation Light # TN52ZR that will contain both the red and green navigation lights and will only require one connection on the front of your kayak. This light also uses 18 gauge wire.

expert reply by: Bud M

1

Answer 1

The Malone MicroSport Trailer #MPG460G uses a #34823 grease seal and #L44643 inner and outer bearings like what you can find in the #BK1-100. For a complete hub assembly with the same 5 on 4-1/2 bolt pattern you can use the #CE13210.

view full answer...

Answer 2

I have a replacement bearing option for you, but at this time we do not offer a replacement hub that uses #LM67048 as the inner and outer bearing. You could replace the bearings with #LM67048, and replace the grease seal on each hub as well given…

view full answer...

Answer 3

I do have an option for you but I do not recommend drilling a hole into your spindle in order for the cotter pin to catch the shroud on your spindle nut. I would first make sure you have the washer installed behind the spindle nut between that and…

view full answer...

Answer 4

The correct replacement leaf springs for a Malone MicroSport Trailer part #MPG460G is the 2-Leaf Slipper Spring part #e36SR. These will be a direct fit replacement for the old springs. They are slipper springs with a 500 lb weight capacity that…

view full answer...

Answer 5

All Malone trailers like the Malone MicroSport Trailer for a Heavy Boat - Saddle Style - 13' Long - 800 lbs Item #MPG460G use a standard #L44643 bearing, so you can use the Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823…

view full answer...

Answer 6

Since you already have the Malone MicroSport Trailer - Galvanized Steel - 13' Long - 78" Crossbars - 800 lbs #MPG460G already comes with the Malone Crossbar Conversion Kit for Standard Utility Trailer #MPG475. It sounds like you are just…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 10

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 11

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Adding Red and Green Navigation Lights To a Kayak

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching