4" Carbon Fiber Digital Caliper
(20 reviews)
Price: $11.44
4" Carbon Fiber Digital Caliper
Item # PTW80157
Retail:$34.39
Our Price: $11.44
You Save: 67%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (20)
- Q & A (0)
- Videos (2)
- Photos
Performance Tool Hand Tools - PTW80157
- Digital Calipers
- Measuring and Layout Tools
- Performance Tool
- Carbon Fiber
Features:
- Performance Tool 4" Carbon Fiber Digital Caliper collects accurate measurements on just about anything from projects around the home or office, to automotive repairs, carpentry or laboratory applications
- Measures outside and inside dimensions
- Accurate to plus/minus 0.01" or 0.2mm
- Large easy to read LCD display
- Lightweight and durable
- Zero setting at any position within measuring range
- SAE to metric conversion
Specs:
- Material: Durable and lightweight carbon fiber
- LCD display
- Measures 0" to 4" SAE by 0.01" increments and 0mm to 100mm metric range by 0.1mm increments
- Includes 1 LR44 battery necessary for operation
W80157 4" Carbon Fiber Digital Caliper
W80157 4" Carbon Fiber Digital Caliper
California residents: click here
Video of 4" Carbon Fiber Digital Caliper
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Performance Tool Carbon Fiber Digital Caliper Review
Today we'll be looking at the Performance Tool four inch carbon fiber digital caliper. Part number PTW80157. This allows you to read from 0 to 4 inches or 0 to 100 millimeters. It moves in 100ths of an inch or 1/10ths of a millimeter. It has a nice LED screen. You hit the on button and it's easy to read.
You can switch between millimeters and inches. Right now it's in inches and now it's in millimeters. Just by the touch of a button. We also have our zero capability so when we move it down our measurement tool, if we want to measure something and see the difference between another measurement, we can hit the zero button and it shows us the difference. This is a negative distance or a positive distance.
Take it back to zero and hit the zero button again so we can start back from zero inches or zero millimeters. This allows us to measure the outside diameter or the inside dimensions with the other side. Now we can show you in action. On our trailer here, we pulled off our seal. Usually it's stamped with the measurements on it, but this one has worn off over time. WE can use our tool to find the inner dimension of our race.
2.18 inches. If we need to figure out the outside diameter, that'll be 3.35 inches. Other measurements that we might need to know. Come to our shaft. We've got the bearings that sit on our shaft so we might need to know the diameter of our shaft.
We can come up, be 1.24 inches and that'll be for our inner or our outside bearing. If we need to figure out our other, the larger bearing, the inside bearing, we do the same thing. 1.74 inches. Now if we need to know the difference between the two, we come up we get the inside bearing, we hit our zero button, that zeros it out, and we can come to our outside bearing and we see there's almost a half inch difference between the two bearing sizes. Same works if you want to figure out the dimensions here for our race because that's where it sits. This is where our race sits. If I want to do difference in that. I'll take our meter, I'll measure the inside diameter of our race, I'll hit the zero button, and then I can come and measure the outside distance of our race and see if there's any difference at all. Which, there's not, but if there was it would show us. There would be a negative difference or if I measure something bigger, it would show us a positive difference. That's it for a look at the Performance Tool 4 inch carbon fiber digital caliper. Part number PTW80157.Speaker 2: You can find this and everything else right here at etrailer.com What's up man.
Customer Reviews
4" Carbon Fiber Digital Caliper - PTW80157
Average Customer Rating: 4.9 out of 5 stars (20 Customer Reviews)
by: Scott 09/12/2023
Works as described.
by: Kenny07/18/2023
Good product
by: Alan A07/11/2020
It works great and it's just plain fun. I bought it to measure bearing buddies and spindles. It works for that but it also has been great for measuring the diameter of carbon fiber tubes I'm using to build a sailboat mast and spars.
It gives instant metric to inch conversions - just push the in/mm button and the measurement in the display converts.
I've used it at least a couple of hundred times and it's still on the original battery.
Pro tip: Close it all the way before you turn it on.
by: Conrail John05/05/2017
I have always wanted a digital caliper now I have one. I have always relied on my older read out types since this is the one etrailer uses I will be able to take the same measurements they do . My local bearing supplier has priced themselves out of the market so I use etrailer !
by: Larry J04/04/2017
A very nice useful tool. First one I got had a malfunction and the company sent me another one right away
by: Henry 11/18/2021
I have not used it yet but what I want to use it for it will work just fine then I can order the right parts for my trailer weather is not good right now to use it
by: Bill 09/12/2022
quick delivery
by: David08/11/2019
Everything works, all parts needed were there, and the instructional videos were exactly what was needed for a first-timer!
by: Joseph 05/29/2020
Thanks so much for this page especially the links the videos.
You all are the best,
by: Mike05/28/2018
Excellent tool for the money not sure how long it will last, but it does work.
by: Stephen08/03/2019
All three items received in good condition and fast.
by: Billy03/26/2022
Works as described
by: Frank 02/10/2024
by: Oscar09/26/2020
Delivered early, packaged well, will try out soon
by: Nelson08/13/2022
by: Thomas 01/14/2021
by: Mike 03/01/2023
by: Dan 01/25/2023
by: John 09/04/2021
by: James 01/10/2022
20
20
See what our Experts say about this Performance Tool Hand Tools
- How Can I Find Out What Bearings, Races And Seals Will Work With A 4-71744 HubWell my friend I am going to need more information from you. Verify the weight capacity of your spindle and axle. Pull off your hub and take out the seals and bearings. I need the part numbers stamped on the bearings and seals. You can see where the part numbers will be on each item in the photo. If you can't find them I'll need measurements on everything and the linked photo will show you where to measure from. **4" Carbon Fiber Digital Caliper # PTW80157. I highly recommend using...
view full answer...
- Bearing Protectors for Zieman F-714 TrailerYou'll either need to clean and repack your bearings by hand or use a Bearing Buddy bearing protector, which is available for many different hub bore sizes. If you'd care to reply with either the reference number from your outer wheel bearing or the inside dimension of the hub bore where the grease cap sits, I'd be happy to see if we offer a compatible Bearing Buddy. The # BB1980A-SS Bearing Buddy you'd looked at fits a 1.980 inch diameter hub bore that uses a L44643 or L44649 outer wheel...
view full answer... - Replacement Wheel Bearing Kit for 3500 lb Trailer AxleIn addition to the bearings and races, you'll need to replace the grease seal as well because it'll get destroyed when removing it which is necessary to access the inner bearing. A 2-3/8 inch diameter axle tube is usually a 3500 lb axle, which usually uses a L68149 inner and a L44649 outer wheel bearing. You'll want to confirm this by checking the reference numbers from the existing bearings. A 3.5K axle will also use a 10-19 grease seal (a/k/a a 58846 or 171255TB, depending on the manufacturer)....
view full answer... - Recommended Trailer Center Wheel Cap for 2015 Highland Ridge Open Range We don't have the specs for your specific trailer's wheel pilot hole. There are two common sizes for the just over 3 inch caps. We have the 3.19 inch option like # 319EZ and the 3.33 inch option like # AM90195. The best way to know which you need is to use a digital caliper like # PTW80157.
view full answer... - Replacement Dust Cap For Haul Master utility trailer model 90154 I am happy to help you figure out which dust cap you need for the Haul Master utility trailer model 90154 however, I was not able to find any information about the wheels on your utility trailer. To get the correct sized dust cap you can simply measure the inner pilot hole diameter of your wheel (where the cap goes). You may find it helpful to use a digital caliper like part # PTW80157 to get the measurement as accurate as possible. For example: the diameter of the grease cap part # RG04-020...
view full answer... - Replacement Bearings for 2000-lbs Dexter Trailer AxleI can absolutely help you locate the parts you're looking for, but you will need to pull the hubs off if you can't locate any identifying information like a serial number on the axle. For axles in the 1,000 - 2,000 pound capacity, there are two common bearing combinations. Depending on the spindle that was used, your hubs and axle could require two # L44643 bearings or two # L44649 bearings. There is only about 1/16 of an inch difference in the spindle diameter that these two bearings...
view full answer... - How To Find Out What Replacement Hub Is Needed For 2004 Big Tex 35SA TrailerWe do not have a manual with the trailer axles listed. There can be so many variations for trailers it would require volumes to hold that much information. I am afraid you will have to remove your hub and either find the numbers for the bearings, race, and seals, or use a digital caliper like part # PTW80157 and measure your spindle in the locations noted in the attached photo and the inside diameter of your hub. If you let me know what you have on your trailer I will be glad to help...
view full answer...
- Recommended Wheels To Change From 16 to 17.5 on 15k PJ TrailerThere are a few options but the Westlake 215/75R17.5 Radial Tire w 17-1/2" Lynx Aluminum Wheel # LHAS701 will not fit the 5/8" studs on your trailer. You can change your hubs to ones with a 9/16" studs to use these wheels. To do this I would need the bearing numbers from the inner and outer bearing of your current hubs to make sure you get the correct hub. If the bearing numbers are worn you can use the attached diagram to measure your spindle with digital calipers like # PTW80157 to find...
view full answer...
- Which Grease Seal Fits 2,700lb Axle on Triton Jet Ski Trailer?Since our 2,700 lb hubs use Double Lip Grease Seal - ID 1.249" / OD 1.983" # 34823, this is likely what you need. The best way to know for sure though would be to wipe off the grease and try to match up numbers on the seal. If you can't read the number, you'll need to use a caliper # PTW80157 to measure the diameter of the spindle and also the inner bore of the hub and use these numbers as your new seal's I.D. and O.D. I attached a help article to assist; there is a diagram showing what...
view full answer... - Is There a Bearing Buddy for a Hub Bore with 2.25 Inch DiameterIf your hub bore is 2.25" in diameter like the # KPCAP then the closest Bearing Buddy Grease Caps would be the # BB2240, which measure 2.24", but this is commonly found to be compatible with Dexter 5200-lbs axles with an outer race 1729 in the hubs. I'm not quite sure this is what you're looking for so you'd want to measure your hub bore using a digital calipers like the # PTW80157 to make sure that you're getting the right ones. Those # BB2240 are push in Bearing Buddies so you'd also...
view full answer... - Determining Which Replacement Hub Fits 1000 Gallon Water WagonWe may have a hub that will work for you, but I will need to know what bearings your current hubs use. To do this you will need to remove one of the current hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649. If your bearings are worn to the point that you cannot read the bearing numbers then you will need to use digital calipers # PTW80157 to precisely measure your spindle in the locations shown in the included diagram....
view full answer...
- Replacement Dust Cap for 2010 Chariot Cougar 1It is very possible that we do, however I need some precise measurements to confirm the dust cap you need for your 2010 Chariot Couger 1. You will need to use a caliper like the 4" Carbon Fiber Digital Caliper # PTW80157 to measure the inner diameter where the dust cap fits. This is a precise measurement. I've attached a link to all of the options we carry.
view full answer... - Determining Which Braking Assemblies And Hub And Drums Fit 2004 Shasta Oasis 24QBI would be happy to help you find the correct braking and hub and drum assemblies for your 2004 Shasta Oasis 24QB, but you will need to take a few measurements as we do not have a breakdown of the components used on a specific trailer. First you will need to determine which inner and outer bearings your current hubs use. The easiest way to do this is by removing one of your current hubs and looking for the bearing numbers stamped in the face of each bearing as shown in the included picture...
view full answer...
- How To Determine Which Replacement Standard Hubs Will Fit Marine Master Trailer with Vault HubsI'd be happy to help, but I need to know the capacity of your axle, if you have brakes, and the bolt pattern. The easiest way to get this information is on the axle tag which is located on the center of the axle beam, so sending me a picture of that would be the easiest for both of us. If that tag is missing, then what you'll need to do is remove one of the hubs and using digital calipers # PTW80157 measure the spindle in the locations shown in the diagram below. Also while doing this...
view full answer...
- How To Determine Which Replacement Hubs and Bearings Fit Old Horse Trailer with Unknown AxleI'd be happy to walk you through how to determine which replacement hub and bearings will fit your old horse trailer, but those numbers are not cross referencing to anything. What you'll need to do is remove one of the hubs and measure the three points of the spindle shown below with digital calipers like # PTW80157. Once you have these measurements let me know and I'd be happy to check what options we have.
view full answer...
- Determining Which 5 Lug Trailer Hubs Fit 1971 Norris Camper TrailerI would be happy to help you determine the correct replacement hub with the 5 on 4-1/2" bolt pattern for your 1971 Norris Camper, but we do not have a breakdown of the specific components your trailer uses so you will need to take a few meaurements. First you will need to determine your bearing combination. To do this you will need to remove one of your hubs and look for the bearing numbers stamped in the face of the inner and outer bearings as shown in the picture of the # L44649. If...
view full answer...
- Replacement Trailer Idler Hubs For a 2007 Tracker TrailStar Boat TrailerThe Trailer Hub Assembly # 8-258-50UC1-EZ does appear to be the correct replacement hub assembly for your 2007 Tracker Trailstar Trailer. To confirm this you will want to remove the entire hub assembly and ensure the spindle is a straight spindle and uses the same size inner bearing. Also the grease seal that is included with this assembly is for a 1-1/2" spindle diameter. You can confirm this with a Digital Caliper # PTW80157. If you are still unsure or find a different size please...
view full answer...
- Determining Which Hub Will Replace Hub Stamped 1377-2I would be happy to help you find the correct replacement hub for your trailer, but the hub and bearing numbers you provided do not cross reference to any parts. Instead you will need to measure your spindle to determine you bearing combination. You will need to use digital calipers like # PTW80157 to precisely measure your spindle according the included diagram. If you can provide the above information I would be happy to help you find the correct replacement hub.
view full answer...
- Recommended Parts To Add Hydraulic Trailer Brakes To 2014 Shorelander Trailer For 20 PontoonThank you for the pictures! We do offer a trailer brake option that will work with the 10" wheels on your 2014 Shorelander Trailer. Since the trailer will be in water you will want to use the Dexter Hydraulic Trailer Brake Kit # 23-398-399 which includes both left and right assemblies and is for hydraulic brakes and will bolt the 4 bolt brake flange found on your axles that I was able to see in your picture. Since you have 5 lug wheels you will likely need Trailer Hub and Drum Assembly...
view full answer...
- Determining Correct Bearings And Bearing Buddy For 2019 Jayco Jay Flight Baja 195 BHI would be happy to help you determine which bearing kit and bearing buddies your 2019 Jayco Jay Flight Baja 195 BH uses, but unfortunately we do not have a breakdown of components used by trailer. To determine which bearings your trailer uses I recommend removing one of the hubs and looking for the bearing numbers stamped in the face of the bearings as shown in the included picture of the # L44649. Now to determine the correct bearing buddy for your hubs you will need to measure the...
view full answer...
- How To Determine The Correct Replacement Hubs And Braking Assemblies For 2017 Forest River TrailerI would be happy to walk your through how to determine the correct replacement hub and drum assemblies and electric braking assemblies, but unfortunately we do not have a break down of the components used on your 2017 Forest River Tent Trailer. First you will need to determine which inner and outer bearings your axle uses. The easiest way to do this is by removing one of your hubs and looking for the bearing number stamped in the face of each bearing as shown in the included picture of...
view full answer...
- Can Spindle of Trailer Axle Be Measured to Pick Out Replacement BearingsUse a digital caliper like # PTW80157 to measure the diameter of the spindle where your bearings ride like you see in the attached picture. With that and the bolt pattern of your hubs we'd be able to get you set up with a new hub or just bearings.
view full answer...
- How to Locate Replacement Bearings for Dexter AxleI spoke with my contact at Dexter regarding your model 3K7258 axle that you referenced in your question. He was unable to pull up any specific bearing information using this model number. If you can locate the axle serial number, which should be printed on a sticker somewhere on the axle itself, this might be more helpful in determining the correct bearing kit. Otherwise, the easiest way to determine what bearings you need is to simply pull off the hubs and check for the numbers that should...
view full answer...
- Locating Replacement Bearings for Yacht Club Utility TrailerThe easiest and most accurate way to determine which bearings are used on your trailer axle is to take the hub off and check for the numbers that should be stamped into the bearings themselves. If you cannot locate the numbers, you can also measure the trailer spindle at various locations where the bearings sit. I have attached an image that shows where these measurements should be taken. You will want to use a digital caliper like # PTW80157, as the measurements will need to be exact....
view full answer...
Do you have a question about this Hand Tool?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
Jared G
Installed by:
Matthew S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video by:
Dustin K
Written by:
Jacob W
Updated by:
Erin H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Larry J.
4/4/2018
Great tool. Use it all of the time