Adding a 7 Way Wiring Harness to a 2011 Nissan Frontier
Question:
Hi, I have a 2011 Nissan Frontier without any factory-installed tow package as far as I can tell. Will this 118266 adapter work for that, and in addition to the hitch, what else do I need? A pin? a mounting bracket for the 7-pin adapter? Any advice appreciated, thanks.
asked by: Eric
Expert Reply:
The Tekonsha # 118266 will definitely fit a 2011 Nissan Frontier without issue. It includes all parts to get the 7 Way up and running. You will, however, need a few parts to get it attached to the hitch.
The No Drill bracket # 18136 attaches to the cross bar of the hitch via a hose clamp, making it easy to get installed. The 7 Way bracket # PK12711U will then bolt to the # 18136. The 7 Way plug from the # 118266 will then bolt right onto the # PK12711U.
The etrailer.com Class III Hitch # e98869 will be a great option for trailer hitch as well. This is rated up to 5,000 pounds towing with a tongue weight rated up to 500 pounds. This increases to 8,000 pounds and 800 pounds when using a weight distribution system. This is also a bolt on application, making the install very straight forward.
The only other parts you will need will be a ball mount, like the Curt # C45030, a ball like the Curt # 40038, and a pin and clip like the Curt # C21500 to hold everything in place. However, it should be noted that the ball mount will depend on how much rise or drop will be needed. The ball size will also depend on the size of the coupler on the trailer.
Products Referenced in This Question
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
more information >
2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 12000 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 3-3/16 Inch Span
- CURT
more information >
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >
Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- Pollak
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Shop: Windshield Covers
- Shop: Side Window Vents
- Shop: Vehicle Tow Bar Wiring
- Search Results: brake controller
- Search Results: 39523
- Search Results: shock absorbing hitch
- Q&A: Are Rock Tamers Compatible With Curt Rebellion XD Shock Absorbing Ball Mount?
- Q&A: Hitch Extender Recommendation to Clear Jeep Spare Tire
- Video: Gen-Y Glyder Shock Absorbing Ball Mount Review
- Video: Review of Gen-Y Hitch Trailer Ball Mount - Adjustable Ball Mount - 325-GH-12005
- Shop: Curt Spectrum Trailer Brake Controller - Dash Mounted Knob - 1 to 4 Axles - Proportional
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti
- Video: Curt Spectrum Trailer Brake Controller Review
- Video: Curt Shock Absorbing Towing Kit with Sway Control Review
- Shop: RockyMounts Hitch Extender w/ Hitch Pin and Lock - 2" Hitches - 8" Long
- Shop: Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 2" Drop - 7K
- Shop: Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
- Q&A: How to Set a 2012 Nissan Frontier Up for Towing a Trailer with Brakes
- Video: Tekonsha Electric Brake Controllers Plug-In Wiring Adapter Review
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2013 Nissan Frontier
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: hitch
- Video: Choosing the Right Trailer Wiring
on Custom Fit Vehicle Wiring
