Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(255 reviews)
Price: $252.94
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13358
Our Price: $252.94
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (255)
- Q & A (0)
- Photos
CURT Trailer Hitch - 13358
- Class III
- 2 Inch Hitch
- 5000 lbs GTW
- Visible Cross Tube
- CURT
- 500 lbs TW
- 7500 lbs WD GTW
- 750 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 7,500 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 750 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13358 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2009 Dodge Sprinter 2500 Van - 144 inch Wheelbase - with factory step bumper
- 2007 - 2009 Dodge Sprinter 2500 Van - 170 inch Wheelbase - with factory step bumper
- 2007 - 2009 Dodge Sprinter 3500 Van - 170 inch Wheelbase - with factory step bumper
- 2007 - 2015 Freightliner Sprinter 2500 Van - 144 inch Wheelbase - with factory step bumper
- 2007 - 2015 Freightliner Sprinter 2500 Van - 170 inch Wheelbase - with factory step bumper
- 2007 - 2015 Freightliner Sprinter 3500 Van - 170 inch Wheelbase - with factory step bumper
- 2010 - 2015 Mercedes-Benz Sprinter 2500 Van - 144 inch Wheelbase - with factory step bumper
- 2010 - 2015 Mercedes-Benz Sprinter 2500 Van - 170 inch Wheelbase - with factory step bumper
- 2010 - 2015 Mercedes-Benz Sprinter 3500 Van - 170 inch Wheelbase - with factory step bumper
- 2016 - 2021 Freightliner Sprinter 2500 144 inch Wheelbase - with factory step bumper
- 2016 - 2021 Freightliner Sprinter 2500 170 inch Wheelbase - with factory step bumper
- 2016 - 2024 Mercedes-Benz Sprinter 2500 144 inch Wheelbase - with factory step bumper
- 2016 - 2024 Mercedes-Benz Sprinter 2500 170 inch Wheelbase - with factory step bumper
- 2016 - 2021 Freightliner Sprinter 3500 170 inch Wheelbase - with factory step bumper
- 2016 - 2024 Mercedes-Benz Sprinter 3500 170 inch Wheelbase - with factory step bumper
Weight Carrying Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
7,500 lbs.
Tongue Weight (TW):
750 lbs.
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
7,500 lbs.
Tongue Weight (TW):
750 lbs.
Tech Tip
Factory step bumper must be mounted on inside of frame rail. Hitch does not fit Passenger vans, and does not fit models with 30-3/8" frame, measured outside to outside of frame. No drilling required for installation
Complete Towing Package for 2012
Package Price:$369.85
Customers Who Purchased This Trailer Hitch Also Bought...
Popular Trailer Hitch Accessories
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13358
Average Customer Rating: 4.7 out of 5 stars (255 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
by: Randolph 03/22/2024
Hitch was just fine, but I wish it had a place to mount the trailer plugs. It was very confusing on ordering the bolts. At the time I ordered it the new year model was not on the web site yet, but hitch placement did not change. I would have paid extra to have the bolts and away to mount the trailer plug.
by: Bill B07/27/2017
Mercedes-Benz Sprinter
The hitch was a breeze to install, it took about an hour taking my time. The electronic box took a little longer, but was easy as well. Since it's been on the Sprinter we've pulled a utility trailer (6x12) with gate and full sides. The hitch and relay box have worked flawlessly. I highly recommend the hitch, relay box and etrailer.
Bill B.
7/27/2018
Everything is still working as it should. The hitch has not rusted out as predicted by a Mercedes snob on the Sprinter Forum. So glad I saved the money and went with your product.
by: Robert04/24/2023
Just installed today and seems very well constructed. Online instructions were helpful. Hangs a little lower than I anticipated. Needed to add trailer connector bracket.
by: Matt F07/23/2017
Ordered it on Sunday and it arrived on Thursday. Build quality and finish look good. My only real disappointment is the hit wasn't packaged well for transportation (basically a large plastic bag wrapped and taped around the hitch) so it arrived with damage to the paint in a few areas. I touched it up with black spray paint before installation.
Installation was very easy. The bolts that held my rear step in place were already oriented correctly so I didn't have to remove them and reinsert from the opposite side. There was some overspray/over applications of the vehicle undercoating onto the mounting surface, but it was easily removed with a putty knife. I didn't have a second set of hands to help so I used a set of jack stands to support the main cross member of the hitch and simply pivoted it into place, sliding a bolt in on each side to keep in there before sliding under the van to install and torque the rest. 30 minutes start to finish.
Nice looking hitch. If it weren't for the shipping damage from the poor packing job I would have given it 5 stars.
by: Daniel 02/16/2024
Mercedes-Benz Sprinter
Perfect match for my Sprinter. Website made it so easy to pick the right Hitch. eTrailer was so helpful too, and shipping was quick and professionally packaged.
by: Bradley03/26/2024
Mercedes-Benz Sprinter
I need a hitch for my sprinter ASAP Brandon was super knowledgeable and friendly It was delivered in two days. normally don’t write reviews but the service was spectacular so I wanted to make sure to let people know what great service they provide.
by: Shaun04/18/2023
2022 Mercedes-Benz Sprinter 2500
Install was quick an easy. I would recommend a floor jack or extra set of hands to hold the hitch up while lining up the bolts.
by: Tom01/09/2021
I have had great products com from etrailers over the years! But this [hitch] from Curt is as bad of an example of American Workmanship I’ve ever seen! The welds are absolutely awful, I’ve been welding 35 years and 20 of that in robotics. I know Curt industries and would think they could produce better.
by: Andrew 07/17/2023
2015 Mercedes-Benz Sprinter
Fast shipping and the hitch fit perfect! Drop the spare tire to make install easy. Awakening Wander has a great install video on you tube.
Curt #13358 - 2015 Sprinter 12 passenger 144 with the back step
by: Tom09/25/2023
2022 Mercedes-Benz Sprinter 2500
Hitch fit perfect, unfortunate had to modify aftermarket step bumper to make it work. Assume would not have to do with factory bumper
by: James08/14/2023
It did fit however it was tight around the muffler. Could be because I have a gas powered Mercedes Sprinter Van rather than diesel.
by: Richard 07/12/2023
I have bought several trailer hitch receivers for different vehicles, they have all been excellent, no problems.
by: Charles05/23/2020
Ordered a few things now from this company and they are legit . My new Curt hitch for my 2019 Mercedes-Benz sprinter Company van arrived on time . Thanks for delivering the product professionally and unscratched. The installation was easy looks tight .Thanks etrailer
by: Earl03/04/2024
2021 Mercedes-Benz Sprinter 3500
Easy install can't wait to put it to good use.
by: Paul 05/15/2023
ETrailer was very easy to deal with. The purchase went smoothly online and once completed I received updates when its status changed until delivery. It even arrived on my doorstep in Alaska sooner than anyone local could promise. The receiver bolted right up to my van as I would expect a Curt product to.
by: Jeff J. 11/18/2016
2016 Mercedes-Benz Sprinter 2500
Super quick and easy to order. Fast delivery.
Easy, easy install. Took me as long to take the plastic off the hitch as it did to install it. 30 mins and done. Great video!
Thank you!!
by: JF11/06/2020
2020 Mercedes-Benz Sprinter 2500
Simple installation. Perfect fit for a 2020 Sprinter 2500 4x4 diesel. No interference from exhaust tailpipe. Requires 18mm socket ans wrench. Needed a 1/2 drive breaker bar w/ 18mm deep socket to loosen the bumper M12 bolts.
by: George06/23/2023
2020 Mercedes-Benz Sprinter 2500
It came with the wrong hardware.
Jenny N.
6/26/2023
It is rare to happen however it does happen from time to time. I do see that we have shipped the correct hardware out to you. A quick way to check to make sure that the hardware is correct is to check the manual part number against the hitch part number.
by: John04/08/2023
The hitch is good quality but it's shipped in plastic. My plastic came torn and my brand new hitch arrived scratched and missing paint.
Jenny N.
4/10/2023
Oh my goodness! I am sorry that it arrived that way. Customer Service will be in touch.
by: Jesse07/06/2023
2010 Mercedes-Benz Sprinter
Fit perfectly on my 2010 sprinter and the instructions were very helpful.
by: Filip12/01/2018
2016 Mercedes-Benz Sprinter 2500
The hitch was very easy to install. I installed just yesterday following the installation instruction. Take me 45 min to install by myself.
by: Matthew 07/24/2023
great fit and great instructions
by: Lucas01/24/2023
The hitch kit is great, super easy to install and is actually a lot sturdier than it looks in the picture. Hitch was missing a few tiny paint chips from the shipping method.
Side note, if you plan on removing your rear step make sure to order the plastic trim piece to replace it. It wasn’t until I started the install that I noticed the plastic trim for the step and the top lip of the “bumper” is all one piece.
by: Jordan09/16/2017
2013 Mercedes-Benz Sprinter
Hitch is as described. Fits perfectly under the factory step. Very easy installation, if you follow directions it's almost effortless.
25
272
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Why Does Curt Hitch 13358 Fit 2011 Mercedes Sprinter Passenger VanIt's an exhaust placement issue that prevents the Curt hitch part # 13358 from fitting the passenger van versions of the 2011 Mercedes Benz Sprinter 2500. That's why you'd need the Draw Tite # 75549.
view full answer... - Trailer Hitch Fit Recommendation for 2017 Mercedes Sprinter 2500For your 2017 Mercedes Benz Spinter 2500 with the factory step bumper we have the Curt hitch part # 13358 which is a confirmed fit for the long and short wheelbase models so it will fit and work well for you. The part # C13388 fits the versions of the vehicle without the factory step bumper. These hitches have plenty of towing capacity and come with limited lifetime warranties so we recommend them highly.
view full answer... - 2020 Mercedes Benz Sprinter 1500 Cargo Van Trailer Wiring Thanks for reaching out! It looks like your 2020 Mercedes-Benz Sprinter 1500 is going to need parts that aren't necessarily confirmed to fit, as you've found with your research and the Curt Trailer Hitch Receiver # 13358. For the wiring I recommend using the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT because it uses clamps for your OEM wiring so you don't have to splice into the factory circuits and potentially mess something up. The clamps then "sense" when to send power...
view full answer... - Curt Class III Trailer Hitch for 2012 Mercedes-Benz Sprinter with 144" Wheelbase I do have a great alternative for you, however the Curt Class III Trailer Hitch # 13275 that you referenced will not fit your 2012 Mercedes Sprinter with the 144" wheelbase. This particular unit is designed only for the 2010-2011 Mercedes Sprinter 3500 cab and chassis with a 170 wheelbase. It will not line up with the frame rails on your vehicle. For a similar Class III hitch from Curt you will need the Curt # 13358, which will work perfectly as long as you have the 2500 model with the...
view full answer... - Hitch Recommendation for 2012 Mercedes Sprinter 3500 Long WheelbaseFor your 2012 Mercedes Sprinter 3500 long wheelbase the correct hitch fit is the Curt part # 13358 which would work well.
view full answer... - Best Trailer Hitch for a 2013 Mercedes-Benz 2500 Sprinter with a 144 inch Wheelbase and Step BumperI recommend going with the Curt Trailer Hitch Receiver # 13358 which is a Class III trailer hitch with a 2" receiver that is confirmed to fit a 2013 Mercedes-Benz 2500 Sprinter with a 144 inch Wheelbase and a factory step bumper. This trailer hitch is rated for 5,000 lbs Gross Trailer Weight (GTW) and 500 lbs Tongue Weight (TW). Then used with a weight distribution system those ratings are increased to 7,500 lbs GTW and 750 lbs TW. Be sure to check the weight ratings of your 2500 in your...
view full answer... - Trailer Hitch Recommendation for 2016 Mercedes Benz Sprinter 2500 with Step BumperWe do have a trailer hitch fit for your 2016 Mercedes Benz Sprinter 2500 that has the factory step bumper. The Curt hitch part # 13358 would be what you need. This fits either length wheelbase as well. In the picture I attached you can see the hitch fitting below the step bumper. I also attached an install video for you to check out too.
view full answer...
- Recommended Tools and Torque Specs for Curt Trailer Hitch 13358 on 2008 Dodge Sprinter 2500 or 3500The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13358 installation instructions which I've attached state to torque all M12 fasteners to 79 lb-ft. If you don't have a torque wrench, I recommend the Powerbuilt # ALL944001 and an deep well 18 mm socket for this application.
view full answer...
- Trailer Hitch Recommendations for a 2018 Freightliner Sprinter 3500 Chassis with 170" WheelbaseThere are a few different options depending on what kind of bumper your 2018 Freightliner Sprinter 3500 Chassis comes with. If you have the factory step bumper I recommend the Curt # 13358, if you have the standard bumper then I recommend the Curt # C13388, and if you don't have the factory step bumper then I recommend the Draw-Tite # 75549. Please note that none of these will fit if you have a 30-3/8" frame measured from the outside to outside of your frame. The installation details...
view full answer... - Recommended Trailer Hitch for a 2016 Mercedes Sprinter 3500As you are looking for a 5,000 pound hitch for your 2016 Mercedes-Benz Sprinter 3500, I suggest going with the Curt # 13358. This will have the capacity needed as well as fit your vehicle properly as well. I included an install video we did on this as well.
view full answer... - How To Choose Correct Trailer Hitch for 2011 Freightliner SprinterI do have some trailer hitch options for a 2011 Freightliner Sprinter but they are largely based on frame type (2500 or 3500), wheelbase (144" or 170"), and bumper setup (standard or factory step). I can't make a recommendation for a trailer hitch without this info as it's ultimately what decides fit. I can however attach a list of options below which you can choose from once you do have the above info. The most popular option is the Curt Trailer Hitch Receiver part # 13358 which fits...
view full answer... - Trailer Hitch and Wiring Recommendation for 2017 Mercedes Benz Sprinter 2500 Long WheelbaseFor your 2017 Mercedes Benz Sprinter 2500 with a step bumper and a 170 inch wheelbase the trailer hitch I would recommend is the Curt hitch # 13358 which is a confirmed fit. I like this hitch because it's made in the USA, has great towing capacities at 5,000 lb towing capacity and 500 lb tongue weight, and is priced great. For trailer wiring we have the Curt kit part # C56496 which is our most reliable trailer wiring option we have for your vehicle too. If you wanted to do some towing...
view full answer... - Which Versions of 2015 Mercedes Sprinter Does Curt Hitch # C13388 FitThe Curt trailer hitch # C13388 fits the following versions of the 2015 Mercedes Sprinter vans: 3500 Van - 170 inch Wheelbase - with standard bumper 3500 Van - 170 inch Wheelbase - with standard bumper 2500 Van - 170 inch Wheelbase - with standard bumper 3500 Van - 144 inch Wheelbase - with standard bumper Since you have the factory step bumper you'll have to go with the Curt # 13358 since your frame is different and requires a different hitch fit.
view full answer... - Can Tongue Weight Capacity Be Increased To Haul Motorcycle On a 2018 Mercedes Sprinter 2500 4x4The highest rated trailer hitch we have for a 2018 Mercedes-Benz Sprinter 2500 4x4 with 170" Wheelbase is the Curt Trailer Hitch Receiver part # 13358 if you have the factory step bumper which is rated for 5,000 lbs gross trailer weight and 500 lbs tongue weight or the Curt Trailer Hitch Receiver part # C13388 if you have the standard bumper which is rated for 6,000 lbs gross trailer weight and 600 lbs tongue weight. Unfortunately, there isn't any way to strengthen the tongue but the factory...
view full answer...
- Curt Trailer Hitch For 2015 Mercedes-Benz Sprinter With 144 inch WheelbaseYes, the Curt Trailer Hitch Receiver, Item # 13358, is a confirmed fit for your 2015 Mercedes-Benz Sprinter with 144 inch wheelbase and factory step bumper. This hitch has a maximum towing weight of 5,000-lbs, and a maximum tongue weight of 500-lbs.
view full answer... - Trailer Hitch for a 2019 Mercedes-Benz Sprinter 2500 with 170” Extended WheelbaseYes, the Curt Trailer Hitch Receiver # 13358 is confirmed to fit your 2019 Mercedes-Benz Sprinter 2500 with 170" extended wheelbase as long as you have the factory step bumper. You can check out the video linked below for installation details. If you have the 170" wheelbase with the standard factory bumper, you need # C13388.
view full answer... - Best Trailer Hitch for a 2016 Mercedes-Benz Sprinter 2500The Curt Trailer Hitch Receiver part # 13358 is what I recommend for a 2016 Mercedes-Benz Sprinter 2500 (144" Wheelbase with Step Bumper). It has a 5,000 lb towing capacity which will be plenty. It features bolt-on installation with no modifications needed so installation will be easy.
view full answer... - Trailer Hitch That Fits 2019 Mercedes Springer 2500 with 170 inch Wheelbase and Step BumperFor your 2019 Mercedes Springer 2500 with the 170 inch wheelbase and factory step bumper you'd want the Curt Class III part # 13358. As far as a swing away arm are you referring to like a swing out hitch adapter for a bike rack? If so, we have the Yakima BackSwing part # Y02483.
view full answer... - Trailer Hitch For A 2019 Mercedes Sprinter 2500 With Factory Step BumperSounds like you have a lot of fun ahead of you once your conversion is completed! A great hitch for your Sprinter is the Curt Trailer Hitch Receiver # 13358. It's a solid choice we've seen many customer's have success with. Plus the 2" receiver allows for a variety of accessories to be carried should you want to do more than biking down the road. The perfect companion for this hitch would then be the Hollywood Racks Sport Rider SE 2 Electric Fat Bike Rack # HLY74FR. It can accommodate...
view full answer... - Availability of a Front-Mount Hitch for 2011 Mercedes-Benz Sprinter RVWe show no front-mount hitches offered for your 2011 Mercedes-Benz Sprinter RV van. I also checked several other model years of this vehicle and none had a confirmed fit for a front-mount hitch. We do of course offer rear-mount hitches and those available for the 2011 Sprinter can be seen on the link provided. The fits will depend on the specific version Sprinter you have. The drop-down menu at the top of the page (Select Vehicle Style) will let you choose your vehicle version to see rear-mount...
view full answer... - Trailer Hitch that Fits 2017 Mercedes Benz Sprinter 2500 with Factory Step ExhaustWe have the Curt hitch part # 13358 which is a confirmed fit for your 2017 Mercedes Benz Sprinter 2500 with a factory step. If you check out the attached picture you can see how it fits with the factory exhaust setup.
view full answer...
- Which Trailer Hitches Fit 2021 Mercedes Sprinter 170 in Wheelbase and Factory StepFor your 2021 Mercedes Benz Sprinter 3500 that has a 170 inch wheelbase and factory rear step the correct fitting hitches are the Curt # 13358 and the Draw Tite # 75601. These hitches are virtually identical in capacity and design with only notable difference being that the Curt is made in the USA.
view full answer... - Hitch Recommendation for 2021 Mercedes Benz Sprinter 2500That depends on the bumper of your 2021 Mercedes Benz Sprinter 2500. If you have the standard bumper (regardless of wheelbase) you'd want the Curt hitch part # C13388 or if you have the factory step bumper you'd want the part # 13358 and you'd have the easiest installing hitch with the best towing capacities.
view full answer... - Will Curt Trailer Hitch for 2016 Mercedes Sprinter 2500 13358 Allow Spare Wheel Carrier to FitThe Curt hitch part # 13358 that you referenced fits the long and short wheelbase versions of your 2016 Mercedes Benz Sprinter 2500 with the factory step bumper. To determine if your spare carrier will fit past the bumper when this hitch is installed you'd need to take one measurement. You'll need to measure from the hitch pin hole out to the nearest upright portion of the carrier. If that distance is greater than 6-1/2 inches it will fit in this hitch and clear the rear bumper.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Video by:
Andrew K
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Peter
3/31/2024
This kit was easy to install and has served reliably for the full year. No complaints, if I needed a new hitch this would be my choice.