Curt Ball Mounts - Fixed Ball Mount - C45030 Review Video

We do indeed have what you need to set up your 2022 Hyundai Santa Cruz for towing a trailer. I do need to mention that the correct wiring harness to start with will depend on if your Santa Cruz came equipped with the factory to package or not, but…

I reached out to my contact at Pop & Lock and sent him along the picture you attached of the latch on your Leer camper shell. He said based on the image the Pop & Lock Power Locking Handle #PAL9555 should work perfectly. The only…

I checked with the manufacturer, and while they did not specify a Leer 180XR, they did say the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers #PAL9555 will fit any model topper with a frameless, bonded glass door with…

I checked with Pop & Lock for you and there is a system that they have confirmed will work with 2011 and newer Leer 100XL, Leer 100XQ, and Leer 700: - Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers…

The conversion kit you are talking about would be the Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers #PAL9772. I checked with Pop and Lock though, and according to them the #PAL9772 is for 2011 and up model year…

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I…

The Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball - 1-1/4" Diameter Shank #C29FR will not work with the Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs #AMSC2 which has a 1…

Assuming that you have the Curt Class III hitch, part #C13128 you can indeed obtain replacement installation hardware. You'll need to use part #RHK. Use the provided link, and on the page you're taken to type 'C13128'…

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

We offer three options in a 2-inch Class III hitch for your 2016 Land-Rover Evoque that can be seen on the linked page. The highest capacity hitch offered is the Draw-Tite #75227 which has a tongue weight rating of 675-lbs and a gross trailer weight…

Thank you for the picture! Based off of that it looks like your 2016 Land Rover Range Rover is either an Evoque or a Sport. If you have an Evoque then I recommend the Curt Trailer Hitch Receiver #C13128 but if you have the Sport use the Curt Trailer…

For a trailer hitch, I'd recommend the Curt Class III, part #13456. The #C13128 hitch you'd looked at is for the Land Rover Evoque, and wouldn't fit your Range Rover Sport. Please note, if your Range Rover Sport has the full-sized spare…