TorkLift Custom Frame-Mounted Camper Tie-Downs - Front for 2004 F-150 8' Bed

Question

Question:

The description says they are for a 6.5, any reason they wont work on an 8 footer? https://www.etrailer.com/Camper-Tie-Downs/TorkLift/TLF2004.html

asked by: Nathan

0

Expert Reply:

We do have the HappiJac Truck-Mounted Camper Tie-Downs, # LC182860 that are a confirmed fit for the 2004 Ford F-150. However, the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front, # TLF2004, is a confirmed fit only for the 6-1/2' bed due to the location suspension. The custom fit tie down for the 8' bed of models from this generation of F-150's is longer produced. Exactly what modifications would need to be made, if even possible, was not identified. Suspension location relative to the mounting of camper tie-down is the concern.

expert reply by: Michael R

0

Answer 1

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 2

Happijac has a set of camper tie downs that fit your 2005 Ford F-150 with the part #LC182860 but the part number you referenced does not fit your truck.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Cynthia, thanks for reaching out! We've got the Draw-Tite Class IV #75506 and the Draw-Tite Class V #41933 that fit your 2006 Ford F-150 STX as long as it doesn't have the factory hitch. I've attached some installation videos of these…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Anthony, unfortunately we don't have a master list of all the fits and non-fits for the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles #e34SR but you can easily measure the leaf spring that you're replacing to verify. If your current…

view full answer...