Review of HappiJac Camper Tie-Downs - Front and Rear Tie-Downs - LC236326-205221 Video

Thanks for reaching out, David! It looks like HappiJac doesn't list any Ram fitments past the 2017 model year but we've been able to confirm this will fit with trucks past that year which is why we show the HappiJac Camper Tie-Downs…

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

Installing the Union Tee #AL21838 with your #AL57575 will tie the pressure of the two air bags together. So yes, a shift in a very heavy load like a truck camper will potentially result in air being forced from one into the other. The reason I say…

According to HappiJac You can replace the Front Anchor Plates for HappiJac in the kit that came off the 2008 Dodge 3500 with the front anchor plates part #LC182871. You can re-use the rear anchors, guide plates and L-brackets. You will need to…

The Brophy Clamp On Camper Tie-Downs #HSAB are not designed as specific fits for a truck, so there is no information regarding their fit on a 2016 Ram 1500 with a 6'4" bed, but I can tell you how to determine it they will. The Brophy…

Yes, the Hellwig Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter #HE24MR is confirmed to fit the 2023 Ram 3500 models with the 6.7L diesel engine. This will work with 2WD/4WD models and is fine with dually models as well.

The HappiJac Truck-Mounted Camper Tie-Downs, part #LC236326-205221, are only available in the colors shown on that page. Even the replacement parts conform to the original color scheme.

The rear tie-downs for your 2024 Chevy Silverado 3500 are still being figured out for fitment but I was able to confirm with the TorkLift fitguide and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TL84FR are what you're looking for.

The Angled Hold-Downs for Truck Bed Campers #HSAB should work very well for your 2003 Chevy Silverado 2500. We had a customer leave us a review that said they were very easy to install and reinstall and that it only took a few minutes, so I think…

If the gross vehicle weight rating (GVWR) of your Haulmark Enclosed Trailer is 10,000 lbs then I can estimate that the tongue weight will be at most between 1,000 lbs and 1,500 lbs if properly loaded . You are also going to want to add the weight of…

There are quite a few option on the fit guide when it comes to camper tie downs, more than likely it is working correctly. The fit guide narrows down the correct part using your year, make, model, bed length, step or no step under bed and hitch type,…

You will want to check your overload spring at the bottom of your leaf springs on your 2017 Ram 3500 to see if there is a hole already pre-drilled. If there isn't you will need to drill holes for the TorkLift StableLoad Suspension Upgrade item #…