Hughes Watchdog Bluetooth Surge Protector Review Video

I do have a solution for you but there have actually never been any custom towing mirrors made for a Nissan Frontier and so I would be surprised if any ever come out for your 2019 Nissan Frontier. Since this is the case I recommend using the…

The etrailer #e98ZR is comparable to the Curt #c31006 you'd mentioned, but I'd stick with the etrailer version. The reason for this is the etrailer version comes with a hitch aligner so that the hitch pin hole always aligns perfectly,…

The 30 Amp Power Watchdog Surge Protector with Bluetooth, #HU97FR has an app that lets you connect to the surge protector via Bluetooth and monitor your energy usage. When voltage increases or decreases to risky levels, you will be notified right…

In order to confirm fit of the etrailer Hitch Mounted Spare Tire Carrier part #e98ZR with your setup you'll need to know the bolt pattern of your wheel. This carrier will work with any size wheel with a bolt pattern of 6 on 5-1/2"…

The K-Source Universal Towing Mirrors part #KS3891-2 would be our best towing mirror option for a 2016 Cadillac Escalade. I don't have confirmation of fit but after looking at photos of the mirrors on the Escalade I don't see any issues with…

I recommend starting with the Roadmaster Rear Anti-Sway Bar, #RM-1139-147. This will reduce side-to-side movement for a noticeable improvement in your vehicle's stability and reduced body roll. For the front, I recommend the Timbren Front…

I checked with Edge and the CS2 part #EP85350 that you referenced has three levels for your 2018 Ford F-150 with a 5.0 liter V8. 87 octane tune adds 24 HP & 25 LB-FT of Torque Tow tune adds 30 HP & 31 LB-FT of Torque Extreme tune adds 49 HP…

It is best to match any surge protector to the service of the RV. Such as the 30 Amp Power Watchdog Surge Protector, #HU97FR or the 50 Amp version of, #HU47FR being used with RV's that match their respectively rated services. You can use an…

The instructions for the Blue Ox Track Pro #BLU47FR are available on the product page towards the bottom, but I've also linked them to this answer for you, as well as a review video that you might find helpful.

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

The Blue Ox SwayPro Weight Distribution System part #BXW0750 which is rated for 550 lbs - 750 lbs is what I recommend for a trailer with 550 lb tongue weight and around 100 lbs in the truck bed. In regards to choosing the best weight distribution…

With weight distribution systems you have to be careful not to jackknife the trailer as you are backing up as you can cause a spring bar to pop out or possibly break along with the head of the system. The best way to know how tight of a turn you can…