Will Blue Ox TrackPro BLU47FR Work with Grand Design XLS 22RBE

Question

Question:

Would this model be suitable for a 2018 Toyota Sequoia SR5 4x4 towing a Grand Design Imagine XLS 22RBE, or would there be a better version? According to my calculations, this would be ideal? Thank you!

asked by: Julian C

0

Expert Reply:

The Blue Ox TrackPro part # BLU47FR would work great with your Grand Design XLS 22RBE and your 2018 Toyota Sequoia SR5. I looked up the weight of your trailer and since it looks like the loaded tongue weight of the camper would fall right in the middle of this system TW range of 600 to 800 lb it would work well.

expert reply by: Jameson C

0

Answer 1

Our Blue Ox TrackPro part #BLU47FR is the same as the BX0850. Blue Ox used to have all of their systems in that grey/bronze finish that you mentioned but they recently started making them more of a black color. This is especially true for the…

view full answer...

Answer 2

The instructions for the Blue Ox Track Pro #BLU47FR are available on the product page towards the bottom, but I've also linked them to this answer for you, as well as a review video that you might find helpful.

view full answer...

Answer 3

Yes, you can get a set of lighter spring bars for the 8,000 lbs Blue Ox TrackPro Weight Distribution w/ Sway Control item #BLU67FR. They are the Replacement 600-lb Spring Bars for Blue Ox TrackPro Weight Distribution System item #BLU82FR.

view full answer...

Answer 4

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 5

Redarc doesn't make a plug-in wire harness for your 2022 Jeep Wagoneer, but they do make an adapter #331-TPH-017 to connect to a Tekonsha plug-in wire harness like part #TK93VR so that you won't have to splice-in any wires to install your…

view full answer...

Answer 6

The main sign of an improperly installed weight distribution hitch is that the the rear of your 2018 Nissan Pathfinder SL is not back to the same height as it was before your 2021 Forest River Wolf Pup was hooked up. To verify park your Pathfinder on…

view full answer...

Answer 7

The 1-1/8 inch socket is needed so that the 3/4-10 bolts that hold the head assembly to the weight distribution shank can be torqued properly to the figure mentioned in step 3 on page 5 of the linked installation instructions. When the instructions…

view full answer...

Answer 8

We do indeed carry replacement brackets for the Fastway e2, like #FA94-00-0800. If all you need is the L bracket, use #FA93-02-5150. The outer link plate is also available as part #FA93-02-5350 and the inner plate is part #FA93-02-5200. The hardware…

view full answer...

Answer 9

I would recommend that Blue Ox TrackPro #BLU77FR simply because it does not have lift chains like the SwayPro #BXW1006. Both will do a great job but the TrackPro will have a little less movement because of the absence of drop chains. Blue Ox is a…

view full answer...

Answer 10

The Blue Ox SwayPro and Blue Ox TrackPro Weight Distribution Systems are both great options. The better of the two is the SwayPro as this is their flagship system. This system doesn't use friction as much like the TrackPro so it will be less…

view full answer...

Answer 11

With all weight distribution systems including the Equal-i-zer #EQ37101ET you cannot make jackknife turns as it will either break a component of the system or one of the bars will pop out. Typically it's when people back up that there's an…

view full answer...