Customers compare BLU47FR to these similar products
Products Featured in this Video
Hi there heavy haulers today. We're going to be taking a look at blue ox's line of their track pro weight distribution systems. These are available in three different weights, depending upon the tongue weight of your trailer. There's an 800, 1000 and 1300 pound option. As long as you don't exceed that, you're good. So if you have only 500 pounds, the 800 would be fine for you.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
We do indeed carry replacement brackets for the Fastway e2, like #FA94-00-0800. If all you need is the L bracket, use #FA93-02-5150. The outer link plate is also available as part #FA93-02-5350 and the inner plate is part #FA93-02-5200. The hardware…
view full answer...The main sign of an improperly installed weight distribution hitch is that the the rear of your 2018 Nissan Pathfinder SL is not back to the same height as it was before your 2021 Forest River Wolf Pup was hooked up. To verify park your Pathfinder on…
view full answer...The 1-1/8 inch socket is needed so that the 3/4-10 bolts that hold the head assembly to the weight distribution shank can be torqued properly to the figure mentioned in step 3 on page 5 of the linked installation instructions. When the instructions…
view full answer...The Curt TriFlex NEXT Trailer Brake Controller #C24VV you are looking at is a proportional controller. This means when you press on the brakes the controller is going to have an inertia sensor which then factors in how quickly the vehicle is stopping…
view full answer...The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…
view full answer...The Blue Ox TrackPro part #BLU47FR would work great with your Grand Design XLS 22RBE and your 2018 Toyota Sequoia SR5. I looked up the weight of your trailer and since it looks like the loaded tongue weight of the camper would fall right in the…
view full answer...You'd be fine to have a weight distribution installed on your trailer as you travel on the hill you described. If anything it might help prevent the trailer from leaning excessively. For a 6,000 lb trailer you'd be looking at a tongue weight…
view full answer...I would recommend that Blue Ox TrackPro #BLU77FR simply because it does not have lift chains like the SwayPro #BXW1006. Both will do a great job but the TrackPro will have a little less movement because of the absence of drop chains. Blue Ox is a…
view full answer...The instructions for the Blue Ox Track Pro #BLU47FR are available on the product page towards the bottom, but I've also linked them to this answer for you, as well as a review video that you might find helpful.
view full answer...Our Blue Ox TrackPro part #BLU47FR is the same as the BX0850. Blue Ox used to have all of their systems in that grey/bronze finish that you mentioned but they recently started making them more of a black color. This is especially true for the…
view full answer...I found a weight distribution hitch that will fit your 24.5-inch tongue. That system is the Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank #BLU36FR. The TrackPro only requires 20" to 25" to mount the lift-brackets. The…
view full answer...Weight Distribution hitches are classified by the maximum tongue weight they'll handle, so the logical first step in choosing the right system for your needs would be to identify the tongue weight of your trailer as it sits when it's fully…
view full answer...