Is Blue Ox TrackPro Weight Distribution Gray or Black

Question

Question:

On the Blu Ox website, this item is shown as BXW0850 and it is a grey/bronze powder coated finish. Is this one the exact same item - color/finish etc, or is it a different model/color/finish? Thanks!

asked by: Julian C

0

Expert Reply:

Our Blue Ox TrackPro part # BLU47FR is the same as the BX0850. Blue Ox used to have all of their systems in that grey/bronze finish that you mentioned but they recently started making them more of a black color. This is especially true for the TrackPro systems which are darker still than the SwayPro systems. Also the picture currently on Blue Ox's site is a computer rendering which makes it look more gray in color.

expert reply by: Jameson C

0

Answer 1

The Blue Ox TrackPro part #BLU47FR would work great with your Grand Design XLS 22RBE and your 2018 Toyota Sequoia SR5. I looked up the weight of your trailer and since it looks like the loaded tongue weight of the camper would fall right in the…

view full answer...

Answer 2

The instructions for the Blue Ox Track Pro #BLU47FR are available on the product page towards the bottom, but I've also linked them to this answer for you, as well as a review video that you might find helpful.

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 10

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The Replacement Mounting Hardware Kit for Car Top Cargo Roof Cargo Boxes, part #CTC-18PARTS, includes u-bolts that measure 3-3/4-inches inside width and 2-1/2-inches depth measured at the center detent. These and other dimensions are shown on the…

view full answer...