How To Install Dutton-Lainson Boat Trailer Roller Bunks On Trailer Without Center Supports  

You can use the 5 foot long Dutton-Lainson deluxe roller bunk #DL21741 on your 8 foot bunk, and you would just locate it in the middle of the bunk. I also offer the Dutton-Lainson roller bunk, part #DL21740. This is a 4 foot long roller bunk, so you…

The only way the roller bunks like #DL21741 could cause damage is if they were improperly positioned, installed, or the boat exceeded the 3,000 pound capacity. They may leave some marks on the boat from the black rollers but other than that you…

I do recommend drilling through holes in your bunk board to mount the Dutton-Lainson Boat Trailer Deluxe Roller Bunk #DL21741. Stainless steel mounting hardware would provide the best corrosion resistance but remember the rails are galvanized and…

If you are looking at the bracket, #DL21742, the long slots that run along the body will mount against a bunk. The L-shaped part at the top has a hole in the top of it that attaches to the bottom of the roller bunk. It is that L-bracket that has the…

Roller bunk brackets like the CE Smith Bolster and Swivel Mounting Brackets for Bunk Boards #CE10196G-4 do not have listed capacities. I spoke to my contact at CE Smith and he informed that that as long as you are under the capacity for your trailer…

Yes, the Yates Ribbed Wobble Roller for EZ Loader Boat Trailers #YR500YW-8PEZ that you referenced would easily handle the weight of your 6,000 lb boat since you'd be using 32 of them.

Thank for the photos of your boat trailer! The CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies #CE10196G-4 that you referenced are a great option to replace the existing bunk system on your boat trailer. These bolster brackets and swivel…

Thanks for the pictures! Yes, the CE Smith Bolster and Swivel Bracket Assembly item #CE10000G would offer your bunk boards support and be a great upgrade to your Escort boat trailer. You can replace your current bunk boards with the 6 foot long CE…

The bunks should be what's bearing the weight of the boat on the trailer and the rollers like the #CE32015G are designed to make enough contact that they guide the boat on the trailer but not fully support the boats weight. Think of them as…

It is a bit difficult to see in the picture, but there are mounting holes in the 4 tabs along the sides of the #YR1203SY keel pad. You would just need to screw through the tabs to the sides of the cross member. We do not offer any hardware…

The CE Smith Carpeted Bunk Boards for Boat Trailers #CE27845 are exactly what you are needing. This is a pair of 7' long bunk boards that are wrapped completely with carpet. These will mount to your existing brackets, so if your current boards…

According to a representative from CE Smith, when the CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4, part #CE10000G-4, is installed correctly these brackets do not support any weight. The u-bolts support the…