Trailer Hitch for 2004 Freightliner Sprinter 2500 with Factory Step Bumper

Question

Question:

Jameson: Thank you for the quick response do I have the option of using the Curt version of this hitch also ?

asked by: Don C

0

Expert Reply:

Yes, we have the Draw Tite hitch part # 75210 as a confirmed fit for your 2004 Freightliner Sprinter 2500 that has the factory step bumper.

Draw Tite states that on vehicles with factory step bumper, bumper mounting brackets will be re-attached at original position with fasteners provided with hitch.

expert reply by: Jameson C

0

Don C.

1/9/2020

Jameson: Thank you for the quick response do I have the option of using the Curt version of this hitch also ?

Reply

Jameson C.

1/9/2020

Yes, you do have the option of the Curt hitch part # 13250 as well.

Reply

Answer 1

Both of our primary hitch suppliers, Curt and Draw-Tite, show no vehicle listing for a M-B branded Sprinter for model year 2004. Only a Dodge Sprinter is listed, both 2500-series and 3500-series. You can confirm the correct hitch based on the…

view full answer...

Answer 2

I apologize for any confusion. With these 2005 Sprinters there are many different versions, and sometime our vehicle listing can get a little crowded/confusing. The draw tite hitch #75210 will be a good fit for your 2005 Sprinter 158" wheelbase…

view full answer...

Answer 3

There are 5 versions of the 2006 Dodge/Freightliner Sprinter so to determine if there is a hitch that will fit we have to look at which specific model you have. If you have the 118 inch wheelbase, single rear wheel model you can use #13250 or #14250…

view full answer...

Answer 4

Your 2006 Dodge Sprinter with 118 inch wheelbase and step bumper should look like the one in the picture I have included. The hitch does fit models with the factory step bumper. You will not have to modify the vehicle at all to install the hitch. The…

view full answer...

Answer 5

The Draw-Tite Class III 2 Inch Hitch, part #75210, is for a 2006 Dodge Sprinter with a 140 inch or 158 inch wheelbase and either single or dual rear wheels. It will not fit the 118 inch wheelbase vehicle. To fit the Sprinter with the dual rear wheels…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...