Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Arched, sturdy steel ramps are great for loading 4-wheeled equipment with low ground clearance. Folding ramps offer compact storage, and safety chains are included. Each ramp supports 500 lbs for a combined capacity of 1,000 lbs.
Features:
Specs:
Average Customer Rating: 4.6 out of 5 stars (43 Customer Reviews)
Arched, sturdy steel ramps are great for loading 4-wheeled equipment with low ground clearance. Folding ramps offer compact storage, and safety chains are included. Each ramp supports 500 lbs for a combined capacity of 1,000 lbs.Performs what I needed it to do for a good price.
Great ramps. Sturdy and portable which will last for years. I did modify the ramps and glued dense foam to the areas where it made contact with my plastic bumper. Quick and easy modification eliminating scratches to my bumper.
Product has a good appearance however the stamped edges seem a little sharp. Did not cut the skin but could if one is not careful. The top piece that sets to the tail gate seems a bit light. When pressing down just to get a feel for it's strength the ramp slightly deformed at the edges of the top piece. I do not plan to load anything very heavy so they will likely serve my purpose well. I'm not sure I would want to repeatedly load 1000#. The fold up feature is nice and the hinges seem strong.
Excellent ! Bought them to load a generator inverter on my truck. Works out perfectly for my needs. Easy to use. Fold up for nice compact storage. I would recommend this for the price. Super fast shipping !
Readers; Here is a 'non-bot' review of this product. It is used to load either a snow blower or a lawn tractor into my GMC truck to take the item for seasonal work. It works well from the ground to the the truck bed, but it is steep, so caution is suggested when going up/down. In my use, I have a 'ha ha' wall which a one point of it is the exact height as the truck tailgate. Thus, the ramp goes from the upper lawn, out in the open for a foot or three, and into the truck. Perfect! but just for me .The ramps are rugged enough for a large lawn tractor. They have the annoying habit of jamming up; the nuts tighten on their own when the 'joint' is used. The chain must be tethered when you carry it, or it tangles under your feet. it gets in the way when you unfold the ramp, I am looking for strong snap links to make on/off easy. For all the quirks, it is one of the best that I have seen and/or used. The fold feature, for me, is a must. I have to carry them to the repairs shop to unload the machine. The lawn tractor fills the entire truck box, the folded ramps go in the back seat[4 door truck, in this case]. I have, in fine, seen one new pair of non-folding ramps bend in twain when the poor sod DROVE his lawn tractor up the ramps, to get it in the truck. Iso, if you want a good, strong useful, & with good traction, ramps- buy a set~be safe and be happy
Kilted T.
9/20/2018
George Greetings! Here is what I learned of the product and its uses. One, I use it for the snow blower, the lawn tractor, a 1980 Honda Elite, all of which went into the back of my truck. I used it to move a HEAVY Anderson Patio door up some porch stairs & last, used them to move a HEAVY bandsaw on a hand truck up the one step into my work shop. In all cases, the things work well. They are strong enough for the purpose. They have decent traction, tho I may spray them with truck bed liner in a can to make them less slippery. The only negative would be the hinges. As made, they are metal shafts with a nut on the threaded end. For some reasons unknown to this writer, when the ramps are used, at some point the nut jams the hinge mechanism, by tightening it down too much. Then you have to stop, drag out the tool box, find the right sockets, handles, etc. and then loosen the nut. There is if course, the inherent pinch the fingers factor. The safety chains drag on the ground when the ramp is carried, and love to get snagged on door sills, weeds, and the like. I fixed it with some twist ties. A better method would be a plus for the new 2019 model Ericsson ATV Ramps ditto the hinge design. And my thanks to the Company Policy that has such a follow up program for customer purchase. It is a good idea, and I am glad to offer my small insight to the total picture. As Ever
There great. work well
The ramps were bought because I sometimes transport a supermoto bike to track days, in a mid-size pickup. When shopping for the ramps, I was looking for simplicity, strength, portability, and affordability. The Erickson ramps meet all conditions. No help needed in loading a 300-lb bike without help (but I do have to have the bike running in gear b/c of bed height.) Four-star rating is only because, through their own fault, an inattentive user could get their fingers cut during use. Maybe running a sander over the ramp surface could help.
Quality is ok. They work but are not the most sturdy. They have bent in places they should not have with only being used a few time.
they have worked well, however there are a couple concerns. you have to bolt on the lip at the top, which means it doesn't come off easily and therefore won't go back in the box. This means they are stored just out and are kind of clunky. It would be nice to keep them stored in their box.
Also, I have to cinch them down on my trailer and when I un-cinch them, they seem bent or twisted such that each segment no longer rests directly in line with the other segments and as such it becomes difficult to open and close thereafter.
Product was shipped quickly. The ramps are high quality and work very well on our Toyota Tacoma. It was very easy getting our Vespa up on the truck. We have mowers and brush cutters that are a forever being transported here or there. The ramps stay put and make the job much easier.
Trothaus
6/8/2018
They are very handy and holding up well. It was a good purchase.
The tri fold design make storing these ramps easy. They work well and are light weight making them easy to attached. The safety chain also works well. You have to attach the supplied angle plates with 4 bolts so the ramps sit nice and flush with the tail gate. One issue is the ends of the ramps, are sharp metal and they will rub against the tail gate and could scratch it. I put some high density foam to over the metal to protect the tail gate with duct tape since I didn't want the top of my tail gate all scratched up.
Love these heavy duty ramps. Even better than we expected.
They have really come in handy. Much easier using them to get our snow blower on the back of our pickup. Would recommend this product for anyone looking to save on their back.
Nancy L.
12/20/2018
GREAT! My husband loves them. Would definitely recommend to anyone who is looking to purchase them, go for it!
Great service from etrailer.These ramps have a sharp edge so I taped some high density foam to keep them from scratching my truck as I don't have my liner installed yet.
These are still getting the job done for me. The only issue I've noticed is they don't fold and unfold as easily as they used to. I suspect they got a little twisted from unloading onto an uneven surface (the bottom of the ramp wasn't on flat ground).
Work great, like the way they fold up and are easy to carry and stow. Leading edge digs into tailgate leaving gouges in the top of the tailgate.
Very solid product; easily folded for storage; fits snug and secure to my small utility trailer for loading. I am very happy with them.
Product is as advertised. Ramps fold up into a smaller package so they're easy to transport when not in use. eTrailer.com folks were very good about communicating shipping and delivery status.
Prompt delivery and shipping tracking. Ramps excellent quality..price unbeatable. Compact design makes for easy storage. I reccomend this product highly.
Sturdy, compact, and light. Gave 4 stars because box it came in didnt have picture of girl in bikini demonstrating it.
Excellent service, product arrived quickly. We have not used the ramps yet but will soon.
Tried my ramps today, loaded snowblower in bed of pickup. Worked great, quality product, only regret is not buying these sooner! Super fast shipping!
The temps were exactly as pictured and described. Fast shipping and great communication means this won’t be my last purchases
So far so good. Look easy to use.
Paul
11/8/2020
Good
Good quality, very sturdy unfortunately it does not fit my truck. I have a 2500 sierra. The slope is a little too steep to get my snowblower up. It did however fit my dads 1500 Silverado.
To whom this may concern:
The service was quick, and efficient, as for the product I believe it will serve the purpose and be fine; A customer well satisfied!
Thank you!
Do you have a question about this ATV Ramp?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
10/22/2022
4 star again. As mentioned before the top end is a little light and could use some reinforcement.