Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

See what our Experts say about this CURT Trailer Hitch

• Trailer Hitch for 2006 Dodge Sprinter That Fits Around Spare Tire
  The spare tire retainer would almost certainly interfere with installing the # 75210, but we do have a hitch that is positioned a bit differently so it would fit perfectly. The Curt # 13250 class III hitch will avoid the spare tire retainer, as shown in the provided photo.
  view full answer...
  
• Will the Thule Elite Van XT 2 Bike Rack Fit on a 2005 Dodge Sprinter Van?
  I do have a good solution for you, however. I confirmed with Thule that the Thule Elite Van XT 2 Bike Rack for Sprinter Rear Door # TH302043 will not fit a 2005 Dodge Sprinter Van. However, the next best solution is to use a hitch and a hitch-mounted bike carrier. For the bike rack, I recommend the Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 2" Hitches # SH22G along with the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks # PVP20B. The great thing about the Kuat Sherpa 2.0 with the Pivot...
  view full answer...
• 2006 Dodge Sprinter Trailer Hitch and Spare Tire Compatibility
  We have two hitch receiver options compatible with your 2006 Dodge Sprinter, however both options do require relocating the spare tire. The compatible hitch receivers are the Curt # 13250 you referenced and the Curt # 14250 which has a higher capacity rating. You may want to consider the Roadmaster Spare Tire Carrier # RM-195125 which won't allow for trailer towing but will allow for flat towing or use of an accessory like a bike rack or cargo carrier.
  view full answer...
• No Space for Hitch Installation on 2005 Freightliner Sprinter 2500HC
  The Curt hitch # 13250 that you referenced is specified as a fit on the 118-inch SRW, 140-inch SRW, 158-inch SRW and the 158-inch DRW versions of the 2005 Freightliner Sprinter HC, but the base model only. If yours is an RV cutaway/cab-and-chassis with modifications and the suspension reaches all the way to the rear bumper then there is no hitch that will fit according to my contact at Curt. We do offer adjustable/universal RV hitches like # 13703 and others shown on the linked page but...
  view full answer...
• Which Trailer Hitch for 2014 Mercedes-Benz Sprinter
  We have several hitch fits for your 2014 Sprinter, but in order to recommend one, I'd need to know if your Sprinter is a 3/4 ton (2500) or a 1 ton (3500) model. I'll also need to know the wheelbase (distance between front and rear axle, measured center to center) and whether the vehicle has the factory step bumper or the regular bumper. If you can reply with this information, I'd be happy to make some recommendations. You can also click the provided link, and click the arrow on the drop...
  view full answer...
• Hitch and Wiring Fits for 2004 Dodge Sprinter
  Both of our primary hitch suppliers, Curt and Draw-Tite, show no vehicle listing for a M-B branded Sprinter for model year 2004. Only a Dodge Sprinter is listed, both 2500-series and 3500-series. You can confirm the correct hitch based on the van's wheelbase and drivetrain. If you click on the "Select Vehicle Style" drop-down menu tool at the top of the linked page you can select your Sprinter's configuration; you will then see the hitches just for that setup. For example, for a 118-inch...
  view full answer...
  
• Will Installation of Curt Trailer Hitch Receiver Require Relocation of Spare on 2003 Dodge Sprinter
  The Curt Trailer Hitch Receiver # 13250 will only require spare tire relocation if you have the 118" wheel base model. If your 2003 Dodge Sprinter has the 140" or 158" wheel base you will not need to relocate your spare tire. The picture you saw was on a model where the spare could remain in place. If you do have the 118" wheel base model, there is not a trailer hitch offered that will allow you to keep your spare tire in the factory location. The only option would be to mount it in a...
  view full answer...
• Trailer Hitch for 2004 Freightliner Sprinter 2500 with Factory Step Bumper
  Yes, we have the Draw Tite hitch part # 75210 as a confirmed fit for your 2004 Freightliner Sprinter 2500 that has the factory step bumper. Draw Tite states that on vehicles with factory step bumper, bumper mounting brackets will be re-attached at original position with fasteners provided with hitch.
  view full answer...
• Exact Measurements for Curt and Draw-Tite Hitch Receivers for a 2005 Dodge Sprinter
  I would be happy to help you. We have those items and I was able to get the measurements for you. I have attached pictures detailing the specific dimensions you have asked for. The Curt Hitch Receiver Item # 13250 fits the 118 inch wheelbase with single rear wheels,140 inch wheelbase with single rear wheels, and 158 inch wheelbase with single rear wheels on 2005 Dodge Sprinters. The Draw-Tite Hitch Receiver item # 75210 fits 2005 Dodge Sprinters with a 140 inch wheelbase with single rear...
  view full answer...
  
• Which Trailer Hitches Fit a 2006 Dodge or Freightliner Sprinter without a Step Bumper
  There are 5 versions of the 2006 Dodge/Freightliner Sprinter so to determine if there is a hitch that will fit we have to look at which specific model you have. If you have the 118 inch wheelbase, single rear wheel model you can use # 13250 or # 14250 If you have the 140 inch wheelbase, single rear wheel model you can use the same Curt hitches above as well as # 75210 If you have the 140 inch wheelbase, dual rear wheel model you can use # 13265 If you have the 158 inch wheelbase, single...
  view full answer...
• Trailer Hitch for 2006 Dodge Sprinter, 118 Inch Wheelbase that Doesnt Require Modifying Step Bumper
  Your 2006 Dodge Sprinter with 118 inch wheelbase and step bumper should look like the one in the picture I have included. The hitch does fit models with the factory step bumper. You will not have to modify the vehicle at all to install the hitch. The only special step is to snap off a corner of the included spacer plates (for models with step bumper only). The plates are designed for this. I have included a link to the instructions and a link to a video showing installation for you. The...
  view full answer...
  
• 2-Inch Hitch for 2004 Dodge Sprinter with 140-Inch Wheelbase for Use with Hitch Bike Rack
  For use with a 2-inch hitch bike carrier I recommend the Curt Class III hitch # 13250 as it is a confirmed fit on your 2004 Dodge Sprinter with step bumper and 140-inch wheelbase. Class IV hitch # 14250 fits your van too but for use with a bike rack you will not need this hitch's 1000-lb tongue weight (TW) capacity, so the Curt # 13250, rated for 600-lbs TW, will be a great choice that actually costs you less. The linked photo shows you the appearance of the hitch and step bumper after...
  view full answer...
  
• Does Mounting Hardware Come With Curt Trailer Hitch 13250
  Yes indeed; the mounting hardware does come with the Curt Trailer Hitch Receiver # 13250.
  view full answer...
• Does Curt Trailer Hitch Receiver 13250 Require Spare Tire To Be Relocated
  I can definitely understand your confusion, and in short they are both correct. The Curt Trailer Hitch Receiver # 13250 you were looking at is confirmed to fit your 2006 Dodge Sprinter, and will only require tire relocation if you have the 118" wheel base model. If your Sprinter has the 140" or 158" wheel base you will not need to relocate your spare tire. With that said, if you do have the 118" wheel base model, there is not a trailer hitch receiver offered that will allow you to keep...
  view full answer...
• When Installing Curt Trailer Hitch On 2005 Dodge Sprinter Is Vehicle Modification Required
  As the instructions for the Curt Hitch # 13250 state, the spare tire will need to be relocated, the hanger bracket will need to be modified, and you will have to drill two 9/16 inch holes in the frame using the trailer hitch as a template. And existing holes in the frame will need to be enlarged to 1-1/8 inches. As far as promoting rust, the hitch is powder coated steel, and is corrosion resistant.
  view full answer...
• Distance From Mounting Plate Bolt Hole to End Of Receiver Tube on Curt 13250 and 14250 Hitch
  The Curt # 13250 has a length of 13-1/2" from the center of the first bolt hole on the mounting bracket to the end of the receiver and the # 14250 has 14" with the same measurement. I've also linked photos of these with those dimensions illustrated for you to have a look at. If there is a specific length you're seeking, just let me know and I can see if there is anything we have that will work. I've also linked an installation video of the # 13250 for you to have a look at, where it provides...
  view full answer...
  

Do you have a question about this Trailer Hitch?