Longer Ball Mount for 2019 GMC Acadia so Liftgate Clears Trailer

Question

Question:

I need a receiver hitch that allows me to open my tailgate while the trailer is hooked up. My current receiver hitch only allows the tailgate to open only when the tow vehicle and trailer are perfectly aligned straight scary close on the clearance. It also needs to be able to raise the trailer 2 inches. Thanks, Bill

asked by: Bill B

0

Expert Reply:

How much more clearance is needed? A standard ball mount usually measures between 8 and 9 inches long, measured from the hitch pin hole to the hole where the ball is installed. There are some longer fixed mounts available, the Curt # C45270 is 13 inches long which would provide 4 to 5 more inches than what you likely have now. A longer model is available, part # BM20, but that ball mount would only offer a 3/4-inch rise.

You could go with an adjustable ball mount like the Curt # D900, which provides 15-1/4 inches between the hitch pin hole and the hole where the ball attaches.

These are the longest ball mounts offered that would provide the 2 inch rise you're needing. A hitch extender like # HE06 would be an option that would add 7-3/8 inches to your existing ball mount but using an extender will lower the hitch capacity by half.

If you'd care to reply with the actual length you needed, I'd be happy to look further.

expert reply by: Mike L

0

Answer 1

We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place…

view full answer...

Answer 2

You actually won't need to trim any rear fascia when installing any of our trailer hitches on your 2020 Toyota RAV4. Out of our selection I recommend going with the Class III Curt Trailer Hitch #C13416 because it has a 2" receiver…

view full answer...

Answer 3

Yes, the Curt Trailer Hitch Receiver, #C13416 is a confirmed fit for the 2022 Toyota RAV4. This has a maximum gross trailer weight rating of 4,000 lbs. and a max tongue weight of 600 lbs. You have a few options for the 2022 Toyota RAV4 that I…

view full answer...

Answer 4

The trailer hitch I highly recommend for your 2019 Toyota RAV4 is the Curt #C13416 because it is a bolt-on installation that will not require drilling into your vehicle's frame to install and Curt's long-standing reputation for making…

view full answer...

Answer 5

Yes, the Curt Anti-Rattle Kit for Hollow Shank #C69HR will hold up when pulling your equipment trailer. This will only work on ball mounts for a 2" receiver with a hollow shank. I feel the Blue Ox Hitch Receiver Immobilizer II #BX88224 is…

view full answer...

Answer 6

The reason why ball mounts like the #EBMK4 have a different rise and drop measurement is because of the way they are measured. Rise is the distance from the top of the shank to the top of the ball platform when the ball mount is oriented for greater…

view full answer...

Answer 7

My recommendation for your 2020 Toyota RAV-4 XSE Hybrid is the Curt Trailer Hitch Receiver #C13416. The Curt is the simplest of the options available to install and provides sufficient capacity for towing uses. The RAV-4 is limited on towing capacity…

view full answer...

Answer 8

I can confirm that a hitch like the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13416 will fit both the Hybrid and non-Hybrid versions of the 2021 Toyota RAV4 since the frames of the vehicles are the same. If you check out the…

view full answer...

Answer 9

Between the Curt Class III Trailer Hitch #C13416 and the EcoHitch #306-X7396 for your 2019 Toyota RAV4 the EcoHitch will provide slightly better ground clearance but it is going to require some trimming on the rear fascia to allow room for the…

view full answer...

Answer 10

I spoke to Curt and they have had no issues with their #C13416 being installed on any of the 2021 Toyota RAV4 options currently available. From the pictures you provided, the frame and exhaust look to be the same as the 2021 RAV4 hybrid that we did…

view full answer...

Answer 11

The Curt Hitch part #C13416 is the best hitch for your 2021 Toyota RAV4 Prime as it's got the best capacities, is mostly hidden, installs relatively easy, and among other hitch manufacturers has the best quality control and powder coat…

view full answer...

Answer 12

We have the flaps you are looking for! On your 2021 Toyota RAV4, I recommend the WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Pair #WT77TR. These mud flaps come with the WeatherTech quality that you respect. This set…

view full answer...

Longer Ball Mount for 2019 GMC Acadia so Liftgate Clears Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching